Windows 10: Windows Logo certified Hardware having issues with Windows 11 Security Update KB5041585 and...

Hi,Windows 11 is causing an issues with our device drivers for the Windows Logo certified hardware products we produce. We are a Windows Gold partner.Steps to reproduce:On booting a PC with Windows 11 installed, and one of our Windows Logo certified hardware products, it was observed that all 8 COM ports had been uninstalled. Attempting to run the latest driver installation, resulted in an error indicating the driver was unsafe and installation was prevented. Specifically, the drivers indicated that SsPort.sys was flagged as the unsafe file.After several unsuccessful installation attempts, an

:)

 

Windows 7 Ultimate (64) Security updates not installing.

I have been having problems in installing the updates that I have listed below. For each update I attempted to install them individually but they would not install. I also downloaded the SURT 6.1 KB947821 v27. The problem has been going on now for about 2 months. (whenever the issue with the updates comes to mind I am never near my pc). Thank you in advance.


Cumulative Security Update for Internet Explorer 9 for Windows 7 for x64-based Systems (KB2838727)
Security Update for Windows 7 for x64-based Systems (KB2757638)
Security Update for Windows 7 for x64-based Systems (KB2785220)
Security Update for Windows 7 for x64-based Systems (KB2790113)
Security Update for Windows 7 for x64-based Systems (KB2813170)
Security Update for Windows 7 for x64-based Systems (KB2813430)
Security Update for Windows 7 for x64-based Systems (KB2839894)
Update for Windows 7 for x64-based Systems (KB2726535)
Update for Windows 7 for x64-based Systems (KB2773072)
Update for Windows 7 for x64-based Systems (KB2786400)
Update for Windows 7 for x64-based Systems (KB2798162)
Update for Windows 7 for x64-based Systems (KB2808679)

 

Windows Update keeps failing!

Hi,

I had once a similar issue like yours, i.e. not able to update Windows 7. What I did to solve the problems is:

- go to control panel, then to "Troubleshouting" > "System and Security" > "Fix problems with Windows update" > click "Advanced" > choose "Apply repairs automatically".

And Windows will start detecting the issues and will repair "Windows update components". The problems should be fixed now, close the program, restart the PC, and see if the mentioned steps have fixed the problems you mentioned.

Hope it works for you.

Good luck!

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.