Windows 10: Windows 11 Update stops at 94%

I have attempted the Windows 11 upgrade after Dell provided 3 new SSDs and installed Windows 10. The first time it stopped at 99% and I went to bed and in the morning it still had not moved. I attempted it again and it went to 94%. The trouble shooter could not find a problem. I now downloaded it again, switched off Wifi and it continues to install now at 73% . There are 800 GB space on the SSDs. What should I do if it still does not go through. Prior to the SSD replacement I had downloaded and installed it and it was running just fine.

:)

 

Windows 10 update stops

I am installing Windows update dated about November 13, 2015 but it stops downloading at 94%

I have tried shutting down the computer several times but it still shows download at 94%

Does anyone have any suggestions?

 

AMD Update at 94% for days

Hello Amy,

Welcome to Microsoft Community and thank you for your interest in Windows 10.

This issue may occur either due to software conflicts or if antivirus is blocking the installation.

Method 1: I would suggest you to
restart the computer and check the issue.

Method 2: If the issue still remains, try
manually reset the Windows Updates Components once again and then
reinitiate the Windows Update process.

Resetting Windows Update Components will fix corrupt Windows Update Components and help you to install the Windows Updates quickly.

Please follow the below steps to reset the Windows Updates Components:

1. Press Windows Key + X on the keyboard and then select “Command Prompt (Admin)” from the menu.

2. Stop the BITS, Cryptographic, MSI Installer
and the Windows Update Services. To do this, type the following commands at a command prompt. Press the “ENTER” key after you type each command.

• net stop wuauserv
• net stop cryptSvc
• net stop bits
• net stop msiserver

3. Now rename the SoftwareDistribution and
Catroot2 folder. You can do this by typing the following commands in the Command Prompt. Press the “ENTER” key after you type each command.

• ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
• ren C:\Windows\System32\catroot2 Catroot2.old

4. Now, let’s restart the BITS, Cryptographic, MSI Installer and the
Windows Update Services. Type the following commands in the Command Prompt for this. Press the
ENTER key after you type each command.

• net start wuauserv
• net start cryptSvc
• net start bits
• net start msiserver

5. Type Exit in the Command Prompt to close it and then restart the computer.

6. After restarting the computer, now retry to install Windows Updates.

Hope this information was helpful and do let us know if you need further assistance. We will be glad to assist.

Thank you.

 

Windows Updates failed to instal

I'm not sure how differant XP media center Edition is but you could clear the history \ cache if these folders are there.

Step 1 Register DLL files.

=================

By trying this step, we can check if the update engines are working properly.



1. Close all instances of Internet Explorer.

2. Click Start and Run, type "Regsvr32 atl.dll" (without quotes) in the Open box and click OK.



Note: There is a space between regsvr32 and atl.dll



3. Similarly, one by one, register the files listed below:



Regsvr32 msxml3.dll

Regsvr32 wuapi.dll

Regsvr32 wuaueng.dll

Regsvr32 wuaueng1.dll

Regsvr32 wups2.dll

Regsvr32 wucltui.dll

Regsvr32 wups.dll

Regsvr32 wuweb.dll

Regsvr32 qmgr.dll

Regsvr32 qmgrprxy.dll

Regsvr32 jscript.dll



Note: If you encounter errors while registering any of these files then skip that file and continue with the next one.



If the issue persists, let's move on to the steps below to verify Windows Update services and temporary folders.



Step 2 Verify the relevant Windows Update services.

=========================================

1. Click Start->Run, type "services.msc" (without quotation marks) in the open box and click OK.

2. Double click the service "Automatic Updates".

3. Click on the Log On tab, please ensure the option "Local System account" is selected and the option "Allow service to interact with desktop" is unchecked.

4. Check if this service has been enabled on the listed Hardware Profile. If not, please click the Enable button to enable it.

5. Click on the tab "General "; make sure the "Startup Type" is "Automatic" or "Manual". Then please click the button "Stop" under "Service Status" to stop the service.

6. Then please click the button "Start" under "Service Status" to start the service.

7. Please repeat the above steps with the other services:



Background Intelligent Transfer Service

Event Log

Remote Procedure Call (RPC)



Note: Event log service is enabled on all of the hardware profiles; this service does not have an option to enable or disable on certain hardware profile.



If it still does not help, let's proceed to step 3.



Step 3 Reload the Update temporary folders.

===================================

One possible cause is that the temporary folder for Windows Update is containing corrupted files. Let's erase all the files there to get the system clean.



1. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net stop WuAuServ



2. Click Start, Run, type: %windir% and press Enter.

3. In the opened folder, rename the folder SoftwareDistribution to Sdold.

4. Click Start, Run, type: cmd and press Enter. Please run the following command in the opened window.



Net start WuAuServ



Please test the Windows Update website and let me know the result. If the issue persists, to clarify the issue and provide more accurate troubleshooting steps, please assist me in collecting the following information.