Windows 10: Windows 11 fresh Install not detect PCIE4.0 NVMe M.2 SSD

Tried to install window 11 to new PC, but window not detect the M.2 SSDDiskpart found on Disk 0VDM disable AHCI modeFormat diskstill nor work, please advise , thank you#Samsung 990 PRO 2TB #MSI B760 GAMING PLUS WIFI Motherboard,

:)

 

Cannot find PCIe 4.0 NVMe M.2 SSD during Windows 11 installation (but found in BIOS)

I'm trying to install Windows 11 on my new PC.

Hardware:

CPU: AMD Ryzen 5 5600

Motherboard: ASUS TUF GAMING B550-PLUS

SSD: Kingston FURY Renegade PCIe 4.0 NVMe M.2 SSD (installed on M.2_1 slot, supports PCIe 4.0 x4 & SATA modes)

Windows ISO:

Downloaded from https://www.microsoft.com/software-download/windows11 (latest); made a bootable USB 3.0 disk.

I updated the BIOS; installed Linux on it and it works without a problem, so it could not be a hardware issue.

I'm not sure if it's the BIOS configuration that is not correct or simply the driver support for this SSD is just missing from the Windows 11 installation disk. I tried to locate the driver by downloading them from ASUS's site but none will work.

So I'm asking for help:

1. What is the correct BIOS configurations for this PCIE4 SSD? (for Windows 11)

2. Is there a driver that I can download to solve this problem? If there is, please give me a link to download it.

Thank you.

 

M.2 NVMe SSDs in Raid 0 array?

@essenbe - thanks for the video - it was pretty much the same instructions I had - with the addition of the d/l folder - I installed the drivers as suggested - ended up with the below pic - Drive 2 - unallocated space is the RAID drvie - out of frustration I decided to format the drive and when it finished the "can't install" deal was still there - again out of frustration - I hit NEXT and Windows installed to the drive <- Good News/Bad News -> Windows will not boot and the drive is not listed under boot options - BUT - progress is being made -break time - *Confused

 

M.2 NVMe SSDs in Raid 0 array?

I am not using a RAID card - there are 3 M.2 slots on the mobo - slots 1 & 2 have Samsung 960 Pro 512 GB drives - slot 3 has a Samsung 960 EVO drive .
I can create a RAID 0 array using the 2 960 Pro drives - but it is not recognized in the Boot options.
Strip size was changed to the suggested 128KB after this pic was taken
I have been messing with the BIOS all night trying to figure this out - no luck