Windows 10: whea unccorectable error when nothing is connected exept power and screen.

Hello. Yesterday i wanted to start my pc and suddenly i got blue screen. It said it needs to be restarted but stucked at 0% for about 7 hours.I restarted it several times after but still didnt worked. I wonder if its just broken and i can throw it out. THANK YOU.

:)

 

Blue screen whea uncorectable error

All I can suggest is that you start the diagnostic tests for hardware errors.



STOP 0x124 Troubleshooting [/i] Read carefully before proceeding.



Warning

If you're overclocking your system, revert back to stock clocks now.





Note Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




ONE [/i] CPU TEST
*Arrow Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums



Warning Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.




TWO [/i] RAM TEST
*Arrow Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.




THREE [/i] HDD TEST
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

FOUR [/i] GPU TEST
*Arrow Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.

 

WHEA Error - Please Help

Everything on my computer has been running flawlessly since building it a few months ago. For the last week, I've been getting random WHEA errors. I assumed they would go away on their own since it was a generic error every time. Today, I got fed up and reinstalled windows. About 15 minutes into the new installation, I get another WHEA error. I googled it and decided to get blue screen viewer to determine the root of the problem. I have no clue how to read this error log though and need help in a big way. Can someone please direct me on how to fix this crap? Let me know what other information is needed. I'm going crazy over here.

 

WHEA Error - Please Help

WHEA Errors 90% of the time are a result of an unstable overclock. sense you said that you are not overclocking than it might be a power supply/delivery issue. i would try and find out what your 3.3v, 5v, and 12v rail reading are. most of the time you can find these in the bios under the hardware monitoring tab. there are other ways to test a power supply but i am not skilled in advanced methods.

if the psu seems alright try giving the cpu a slight overvolt. you may have just got a really bad chip or its just hungry.

edit, why i bring up the power supply is because i had a similar situation were i was getting WHEA errors and just ignored them. after a while the computer would just randomly lock up and i would have to shut it down. ended up being the psu.