Windows 10: What could be causing BSOD driver failure

I've tried the driver verifier steps and the files are here. The issue happened after closing the Steel Series app, reopening it, and then trying to open windows security app which resulted in the BSOD.With diver verifier turned on the crash repeatedly occurred on boot with failure to boot.Then I turned off driver verifier and it booted fine.

:)

 

Driver Power State Failure (ntoskrnl.exe+22092e ) BSOD

Hi Ayan,

I suggest you to follow the steps given in the link below and check if it helps you.

Redirecting

Let us know the status of the issue.

 

BSOD kernel security check failure


Hi meakashi,

Welcome to the 10forums for both of you

I would suggest to visit Acer to update or re-install all the drivers available for Windows 10.
Re-installing drivers removes corruption what helps improving system stability.
Drivers en handleidingen downloaden | Officiële Acer-site

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window.

 

BSOD Hardware Caused???

they do weird things like that, which all seem like something else is failing.
One of the worst things to diagnose, they seem to only quit when they want to.

Memtest is a good next step, if you rule out RAM and Power Supply make sure you disconnect all unnecessary peripherals and try to start the system with as little hardware as possible, if it works then, you can narrow down the culprit by trial and error.

the follow was taken from some website:

It's very difficult to determine if a failure is caused by the CPU because many other components can cause the same symptom when they fail.

1. System fails to boot
2. System re-boots intermittently
3. General Protection Fault
4. Illegal Operation
5. Stop Error, or BSoD (Blue Screen OfDeath)

Actually, CPUs rarely fail, and about the only way to determine if the CPU is causing the failure is to swap it out with a known working CPU of the same type and speed. Since this is difficult, the best bet is to first rule out every other possibility.

Before suspecting the CPU, rule out all the possibilities listed below.

1. The Operating System
2. A peripheral port device
3. A bad memory module
4. The hard disk drive
5. The power supply
6. The motherboard

If you have ruled out out all the other possibilities, investigate the items listed below.

1. Overheating
2. A short circuit
3. ESD