Windows 10: Warzone bad performance

My warzone performance is really bad, i tried everything, i dont want to write down things, that i tried, i would be really long.My laptop: HP Pavilion Gaming Laptop 15-ec1xxx so my specs are: GTX 1650 Ti Laptop, AMD Ryzen 4600H, 8GB RAM.

:)

 

WIndows Performance Gone Bad -- DNS

Two developments:

1. The morning after disabling the overnight backup job there was no performance problem.
2. Lenovo reported three pending driver updates, which I installed:
   • Thermal driver
   • Power Management driver
   • Bluetooth driver

That power management update looks promising since it was a power-cycle that temporarily corrected the problem.

After installing those updates I did a manual invocation of the backup job and there was NO subsequent performance problem. That doesn't prove anything but it is suggestive! I have re-enabled the automatic, scheduled, backup job and will see if there is
or is not a problem tomorrow AM.

 

Warzone crashes 100% of the time mid game.

Hi Mialo. I'm Greg, 10 years awarded Windows MVP, here to help you.

Does it only happen with the one game?

1) Then try these fixes for War Zone crashing in Windows 10:

https://thedroidguy.com/call-of-duty-warzone-cr...

https://www.drivereasy.com/knowledge/how-to-sol... (Your do NOT need the driver app, update drivers from the manufacturer)

https://exputer.com/guides/errors/warzone-keeps...

https://www.technewstoday.com/warzone-keep-cras...



2) If the above steps don't help then go over this checklist to make sure the install is set up correctly, optimized for best performance, and any needed repairs get done:

http://answers.microsoft.com/en-us/windows/wiki...

Start with Step 4 to turn off Startup freeloaders which can conflict and cause issues, then Step 7 to check for infection the most thorough way, then step 10 to check for damaged System Files, and also Step 16 to test a new Local Admin account. Then continue with the other steps to go over your install most thoroughly.

3) Update your drivers and BIOS/UEFI firmware from PC or motherboard maker's Support Downloads web page, using the full model number, Serial Number or Dell Service Tag on sticker. Compare the latest drivers available for download with the ones presently installed in Device Manager reached by right clicking the Start button. Make sure you have the latest BIOS or UEFI firmware, Chipset, Display (Video), Sound, USB3, Bluetooth, Network and all other drivers, or else download and install the latest now.

Updating drivers from the Device Manager or Windows Update is rarely enough. The most basic thing we need to learn to maintain a PC is keep the latest manufacturer's drivers installed from their Support Downloads web page.

4) If nothing else works then do a Repair Install, by installing Media Creation Tool, open tool and choose to Upgrade Now. This reinstalls Windows while keeping files, programs and most settings in place, is the most stable method to advance to the latest version, and solves most problems. https://www.microsoft.com/en-US/software-downlo...

HARDWARE TESTS -

5) Test the memory using WIndows Memory Diagnostics: https://www.techrepublic.com/article/how-to-det...

If problems are found then test the RAM overnight to stress it with the best bootable test memtest86, following this guide to test both sticks and slots:

https://www.tomshardware.com/how-to/how-to-test...

6) Test the hard drive or SSD with diagnostics:

https://www.lifewire.com/free-hard-drive-testin...

https://mashtips.com/ssd-health-test-and-perfor...

HP and Dell have hardware diagnostics triggered by tapping the ESC or F12 keys respectively as you power on.

Best is to use the HDD/SSD manufacturer's own if there is one, otherwise use Seatools bootable long test: http://blog.nowherelan.com/2013/04/04/boot-seat...

Follow this up with a full Disk Check from the Command Prompt in Repair Mode or from bootable media: https://www.groovypost.com/howto/check-hard-dri... if necessary from the Command Prompt at boot: https://www.tenforums.com/tutorials/2294-advanc...

7) Stress test the rest of your hardware:

https://techguided.com/best-tools-to-stress-tes...

8) If no hardware problems are found then look over this tutorial for a gold standard Clean Install which compiles the best possible Install of Windows which will stay that way as long as you stick with the tools and methods given, has zero reported problems, and is better than any amount of money could buy: http://answers.microsoft.com/en-us/windows/wiki...

The reason I suggest this is that no one who has adopted the install in the above link has ever come back to report further problems I've seen, including another version failure. This is because everything in Windows 10 is dependent upon the quality of the install, especially Version Updates which will choke on lesser quality installs, and there is no possibility of problems if you stick ONLY with the steps, tools and methods in that tutorial.

It is also one of life's great learning experiences that will permanently make you the master of your PC because you will learn everything that works best and how to keep it that way.



I hope this helps. Feel free to ask back any questions. Please report back feedback for all steps given so I know what else to suggest if necessary.

______________________________________________

Standard Disclaimer: There are links to non-Microsoft websites. The pages appear to be providing accurate, safe information. Watch out for ads on the sites that may advertise products frequently classified as a PUP (Potentially Unwanted Products). Thoroughly research any product advertised on the sites before you decide to download and install it.

 

Edge Search Does Not Permit Change of Region


I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
I would suggest you to try the below steps and check if it helps.
Step 1:
Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

1. Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.
2. Select Settings and click on Choose what to clear.
3. Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

Step 2:
I suggest you to create a new user account and check if the issue occurs.

1. Go to Settings.
2. Choose Accounts and then select Family and other users.
3. Select add someone else on this PC.
4. Enter a user name and hit next.
5. Click on Finish.
6. Sign out from the current Account and Log into the new account.

Step 3:
It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.