Windows 10: usb unknown device, no driver ID says "ACPI\VEN_ATK&DEV_0110"

I plugged in a USB little dongle device and it cant install a driver as it does not know what it is.
When searching for the device hardware ID says
"ACPI\VEN_ATK&DEV_0110"

It leads me to an Asus ACPI download file, but when I run it, Win10 blocks it with red.
Looking at config file in the .rar, it mentions all these other windows versions except 10.

Download ASUS ATK 0110 Virtual Device ACPI Driver 1043.2.15.37/1043.4.0.0 for Windows 9X, Windows ME, Windows NT, Windows 2K, Windows XP, Windows Vista, Windows XP 64 bit, Windows Vista 64 bit

I scanned file with malwarebytes and it is clean



:)

 

ACPI Driver for Lenovo ThinkStation E32

i am in a need of the ACPI Driver for a Lenovo ThinkStation E32, i am installing raid on for a customer.

Hardware-ID for the "Unknown Device" is "ACPI\LEN4001" and when i google for that or Lenovo ACPI i get this driver for Windows 7 i can't get to work...

Driver: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS029250

even checking with Windows Device Manager i come up with nuth.

 

"Unknown USB Device" error message - how to identify device?

When a device connects to a plug and play bus (like usb) there's a bus h/w handshake between the upstream controller and downstream device. Upon a successful handshake, the device sends Windows its device descriptor. Windows uses the device descriptor to id the device and search for a driver. If the handshake fails or windows can't receive the descriptor for any other reason, windows can't recognize it and it's "Unknown"

Hi @spunk

Googling the h/w id of an unknown device won't help. The vendor id within a h/w id should be a non-zero value. However, by definition, vendor id in an unknown device = 0000. I believe you'll find the h/w will start USB\VEN_0000 So h/w id won't help for an unknown device
@x509
To my knowledge, no way to map usb connector on m/b to a physical usb port on computer. However, you can use USB Tree Viewer to see the hierarchical connection of usb devices which might help you determine the device now appearing as Unknown

Here are some things to try. You can

• Disable USB selective suspend
• Try turning of Fast Start
• Reinstall chipset drivers
• Check for BIOS update
• If a laptop, make sure laptop plugged in
• Disconnect any external USB hubs

If you identify the unknown device, and it continues a problem

• Try different usb ports
• Try different usb cable
• As @Caledon Ken noted, power off device. Connect it then power up

 

Windows 10 reports unknown device ACPI\INT3515

Windows 10 Device Manager reports unknown device ACPI\INT3515

What is that device, and where are its drivers?