Windows 10: USB floppy drive not working on Windows 10

So, I recently got a USB floppy drive for my old mac and I thought I could share data with floppy disks, but when I plug in the floppy drive and insert a floppy disk, it wouldn't recognize it. So, I went to device manger, and it said: This device cannot start. Code 10 STATUS_DEVICE_DATA_ERROR





Thank you,


AJ

:)

 

Windows 10 USB Floppy Drive not working

Hi Willard,

Thank you for your response with the current status of the issue.

The issue could occur if the USB Floppy driver is corrupt.

To assist you better, please provide us the below information:

• Have you tried checking in another computer?
• Have you made any changes to the computer prior to the issue?

I suggest you to update to update TEAC USB Floppy drive and check if it helps.

1. Press Windows Key + R Key.

2. Then type “devmgmt.msc” without the quotes and hit on Enter Key.

3. Expand Disk Drives.

4. Right click on the USB Floppy driver and click on Update driver software.



Reply to us with the information, so that we can assist you better.

Let us know if you need any further assistance on Windows related issues and we will be glad to help.

 

Windows 10 USB Floppy Drive not working

I have a TEAC FD-05PUB USB Floppy Drive which was working with Windows 7.

Now with Windows 10, the Floppy Drive is "seen" by the system and has installed the SONY-FDU USB Device and its states that "This Device is working Properly".

However, when I insert a floppy, the Floppy Drive tries to continually read the disk as if there is a fault with the disk. I have tried several disks and non are recognised. Before anybody asks, I have tried these disks on another machine and they work OK.

When I remove the disk from the Floppy Drive, the Floppy Drive still seems to want to access the disk even though there is not one in the drive - the green light on the front of the drive turns on repeatedly and you can hear the motor spin. Sounds like an
issue with the SONY driver to me.

I have tried to look for a suitable driver on the web but am a bit dubious about some of the sites that come up. I have even tried to get Windows to load a different driver but I'm unable to get a list of Floppy Drives to appear when I ask to do an "Update
Driver Software" within Device Manager.

Anybody any ideas on what to do next?

Alistair

 

Support for non-USB Floppy Drives in Windows 10

I have a USB device and used the old instruction for windows 7 and it seems to work

In this day and age, with the fact that most new pc’s do not have floppy drives anymore, as a tech, I still find times where bring out an old reliable floppy is my best way to resolve a problem. Many people still have some “classic” tools that
are on floppy, or documents or pictures saved on floppy (Before CDRW/DVDRW drives became the norm, floppy disks were the way to store and transfer files).

The problem is that many of the Floppy drives do not have drivers or “official” support for Windows Vista or Windows 7. This post covers just such an issue. I use an Iomega USB drive, and whenever I plug it into my Windows 7 pc’s, I get a message
that Windows can’t find a driver for my device.

Here are some simple steps to get your drive to work with Vista or W7.

1) When you install the drive you will get the message that your drive needs to find drivers. Just hit Cancel

2) Go to start –> Control Panel –> System –> Device Manager

(Example from Windows 7, Vista may look a little different)

3) When the Device Manager opens you will see a listing for X1DE-USB with a Yellow triangle next to it under Other Devices. On that line item right mouse click (NOTE IM SAYING RIGHT MOUSE) and then select Update Driver software and left mouse
click (NOTE THAT I SAID LEFT)

4) Now select Browse my computer for driver software

5) Now select Let me pick from a list of device drivers on my computer and click on Next

6) Now you will get a box to select your device type from list, click on “Show All Devices” and click on Next

7) In the following window, for the box on the left select NEC Systems, and then on the right select NEC USB Floppy then click on Next

8 ) You will be told by Windows that “Installing this device driver is not recommended…..” its ok just click on Yes to continue.

9) Lastly you will be told that Windows has successfully updated your driver software.

Now if you look at the Device Manager you will see the listing for Floppy disk drive – Citizen X1DE.

Finally if you look in the My Computer icon, you will see the A: drive listed for your floppy drive

With that you now have a working Floppy USB drive.