Windows 10: static startup & reset not helping

hi! i bought a new computer and used it for a month or so just fine, one day i think it’s been a while i powered it off after use and powered it back on later and the startup screen starts loading with the windows icon but then suddenly a bunch of static appears, a bunch of lines. eventually the screen will go to a “repair recovery” option and i have tried every button possible on this screen and it’s still not working, i even took out the cmos battery and put it back in as a last desperate hope and nothing. i don’t care about any files getting lost or anything i just want to try and get it

:)

 

Loud Static Through Speakers Problem

Im Getting Loud Static Through Speakers When First Starting Up Before Windows Plays The Startup Sound, The Loud Static Stops After The Windows Startup Sound Plays. Seems Like Ive Had This Problem After Overclocking. Specs Are As Listed, Please Help.

 

Can't get GPU-Z to start with Windows 8.1 startup

I'm not sure how to do that. Could you list the steps for a noob?

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".