Windows 10: Regular BSOD followed by boot loop, especially when on battery.

Hi everyone, I've been getting regular BSOD with different errors, the last of which was "irql_not_less_or_equal". My system gets stuck in a boot loop each time showing different BSOD errors 4 or 5 differnet errors. I've tried resetting the chipset driver to what's on the Asus Website, I've tried reformatting and reinstalling everything. I've tried checking for updates repeatedly. It happens randomly when plugged in, but I've noticed that it happens consistently when I unplug my laptop. System Specs:Model: Asus Zephyrus Duo 16 2022CPU: AMD Ryzen 9 6900HX with Radeon Graphics, 3301 Mhz, 8 C

:)

 

HP Laptop Boot Loop

I am encountering a boot loop problem with my HP laptop. Upon startup, it shows the HP logo and loading dots for about 11 seconds, then goes to a blank screen for approximately a minute before automatically restarting. The power button does not turn off during this cycle.

Troubleshooting Steps Taken:

• Tried hard reset and accessing BIOS/UEFI settings.
  
• Unable to boot into Safe Mode or recovery environment.
  

please see here the recorded video demonstrating the boot loop behavior for reference.

Any advice, troubleshooting steps, or insights into what might be causing this problem would be greatly appreciated.

Thank you in advance for your help and suggestions.

 

bsod loop device verifier ionmanager violation

Hi Tom,

To better assist you, provide the answers to the following questions:

• Have you made any changes on your device prior to the issue?
• What is the complete error message that you're seeing on the screen?

For the meantime, we suggest checking the answers on the following threads below which we found similar and helpful in resolving the issue:

Windows 10 Driver Verifier BSOD loop.. how to get out of it?

Windows 10 stuck in bsod reboot loop

Let us know if you need further assistance.

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.