Windows 10: Qualcomm 7800 does not work on Windows 10 24H2

Hello,I have a Qualcomm® FastConnect™ 7800 Wi-Fi 7 and Bluetooth v5.4 network card in my laptop.Wi-Fi was working fine on 23H2, but in 24H2, the driver cannot be installed at all.I downloaded the driver from the manufacturer's website.Laptop: MSI Alpha 17 C7VG-035XPL.Screenshot: https://imgur.com/J9zE25g

:)

 

Qualcomm Gobi2000 9225 driver for windows 10

Hi Stone Chen,

We appreciate you for being a part of Windows 10.

Before proceeding, we need more information to help you better.

• Do you get any error when you try to run the Qualcomm Gobi2000 9225 driver?
• 
  Did you try to install the Qualcomm Gobi2000 9225
  Windows 7 driver in compatibility mode?
  

Kindly follow the below steps and check if it helps.

Method 1:

You may try to update the Qualcomm Gobi2000 9225 driver and check the functionality of the driver.

Refer to the following article to update all the drivers available in Windows 10.

How to: Install and Update drivers in
Windows 10

If the issue persist, follow the below method.

Method 2:

Follow the below steps sequentially.

Step 1:

First, I suggest you to uninstall the Qualcomm Gobi2000 9225 driver.

• 
  Press Windows + X keys on the keyboard, select Device manager.
  
• 
  Locate the Qualcomm Gobi2000 9225 driver from the list of drivers available in Device manager.
  
• 
  Right click on the Qualcomm Gobi2000 9225 driver and click
  Uninstall.
  
• 
  Click OK (if any dialog box prompted)
  

Step 2:

I suggest you to install the Qualcomm Gobi2000 9225
Windows 7 driver in compatibility mode and check the functionality of the driver.

Compatibility mode runs the program using settings from a previous version of Windows. Try this setting if you know the program is designed for (or worked in) a specific previous version of Windows.

Follow the steps to install the drivers in compatibility mode.

• Right-click on the Qualcomm Gobi2000 9225
  driver setup file and click on Properties.
  
• Click on the compatibility tab and check the box
  Run this program in compatibility mode for and select previous Operating System from the drop down. (Windows 7/8/vista/xp/other Windows as you prefer).
• Click on Apply and click ‘OK’ and run the file to install it.
  

I hope the above information helps. Kindly let us know if you need any further assistance with Windows. We are glad to assist you.

Thank you.

 

MWC 2022: Qualcomm introduces FastConnect 7800

Source: https://www.qualcomm.com/news/onq/20...luetooth-audio FastConnect 7800 | Qualcomm

 

AMD 7800 4 monitor problem since Windows 10 - SOLVED

In my case, I have found a solution to my myriad problems I was having with the AMD 7800 & 4 monitor setup. These have occurred almost continuously since first running 10 preview. It had come down to only being able to display 2 monitors on the 6
DP AMD 7800 card. I had to run the other two from the built in Intel 4600 with one on DP and the other HDMI. Running an Intel i7-4770K on ASUS Sabertooth Z87.



What worked:

• Remove the AMD 7800 card from my system. Running on the built in Intel 4600 with 2 monitors only.
  
• Uninstall ALL AMD/ATI stuff:
  • Using AMD uninstall utility (the normal method would not run)
  • Delete all AMD/ATI folders I could find, under "users" and in programs etc.
    and on the C: drive.
  • Run the REVO uninstallation tool and use advanced tools.
    • Remove all instances of AMD/ATI from the directory.
    • Run PCTools Registry Cleaner
    • Run REVO again and remove more from the directory.
• Called Visiontek the maker of the 7800 card. During 1 hour on the phone the very patient and knowledgeable tech walked me through a long list of troubleshooting steps. Which included:
  • Installing the 7800 card from AMD and booting up in VGA mode
  • Set the bios to use the external (7800) card.
  • Installed the AMD beta drivers
  • Swapping around cables, monitors and ports. Had variously 1 or 2 monitors of the 4 recognized then had 3 working and one recognized as a generic monitor but not active.
  • Shut down power to the system and unplugged the one monitor with was not active.
    
  • Pressed the power button on the inactive monitor 5 times and the start button on the computer 5 times to discharge capacitors that may have been holding up internal memory of invalid configuration.
  • Disabled the internal Intel 4600 GPU.
  • Uninstalled the inactive monitor and cold booted. Now only two monitors of the 4 active.
    
  • All 4 monitors now recognized correctly but 2 still not active.
    
  • Selected the inactive monitors and extended desktop to them one at a time.
    
• ALL four working on the external 7800 card and the built in Intel disabled.

WAS THIS MS, AMD, ASUS, or Visiontek's problem?