Windows 10: printer operation could not be complete

There is a problem with my printer. It works yesterday however right now I cant print at all. Test page is working fine though.

:)

 

Can't share printer—getting error message

Step 1: Go to store.
Step 2: Buy a less shitty printer.
Step 3: Pick up some beer while you are there.
Step 4: Enjoy both your new printer and your beer.

In all seriousness, I have had more issues with Lexmark printers and their shitty drivers then any other manufacturer, HP is a close second though.

However, if you don't want to get a new printer*Laugh :laugh:, and I can understand that, when my Lexmark was giving me the same troubles in Win7(and Vista) I had to make sure the Windows firewall was ON and the firewall service was enabled and running. After I shared it I could re-disable the firewall and firewall services.

 

Error: "Not enough resources available to complete the operation" code: 0x800706b9, while trying to access printer on Windows 10

Hi Grimes,

As you are facing issues with accessing the printer, do not worry we will help you with this issue.

Do let us know if you have made any changes to the operating system prior to this issue?

This issue might have occurred due to stopped services. Let us try the below troubleshooting steps and check if it helps.

Step 1: I suggest you to check the status of
Print Spooler service and check.

Print Spooler service, spools print service and handles interactions with the printer.
If you turn off this service you won’t be able to print or see your printer.

Steps:

• Press Windows + R to open Run command, type
  Services.msc and press Enter.
• Search for Printer Spooler service, right click on it and
  Start the service.
• Also, set the Startup type to Automatic.
• Now check if you are able to install the driver.

Step 2: I suggest you to run Printer troubleshooter and check if it helps.

• Press Windows + X, click on Control Panel, select
  Category and then select Large or Small icons.
• Click on Troubleshooting and click on
  View all in the left pane.
• Select Printer and follow on-screen instructions.

Step 3: Make sure the Remote Procedure Call status is Started and set to Automatic. RPC Locator should be set to Manual. Follow the below steps for the same:

• Press Windows + R keys from the keyboard to open
  Run command.
• Type services.msc in the search box and press
  Enter.
• Search for the Remote Procedure Call locator service
• Make sure the Start-up type is Manual.
  

Steps to set the services to Automatic

• Right click on the service
• If the service is stopped then Start the service
• Select Properties
• And in the Start-up type, select Manual.

Hope it helps. Get back to us with an updated status of accessing the printer for further assistance.

Thank you.

 

Windows Updated(16299.309).KB4088776 Restart is required to complete.

Hi dalchina. Good news, I followed your suggestion and reinstalled the update and now it appears as "installed correctly" *Biggrin Maybe it was not necessary to run the Windows Update Troubleshooter or maybe if necessary. But using it I do not think it could have worsened something. The installation was very fast, unlike the first time it showed step 1 and step 2 completed.

Thanks for the suggestions and for the time to respond Best regards.


And thanks for the tip of that program, I'll have it on my list.