Windows 10: PC Crashing Blue Screen

I have been experiencing my PC crashing for a number of months, mainly when running programs such as Adobe After Effects and Premiere Pro. However, it has recently started occuring seemingly at random. The errors are usually "Clockwatch Timeout" but sometimes it can vary.I have included the mini dump files below, I am hoping someone can help me figure out what is causing the crashes.https://drive.google.com/drive/folders/12sVQOhO89xqYv9zEZUu3Qm-A6w3z4vAJ?usp=sharingThanks very much

:)

 

Crash/blue screen

Hi

I assume from the title of your post Crash/Blue Screen that the PC has crashed and produced a *BSOD=[Blue Screen Of Death] =Blue Screen; and that the PC recovered from this; if and when you see the Blue Screen write the Stop Code down; recover the PC or use one that is working to access the net and look up the Stop Code.

nb: You may be able to view this with a [*BlueScreenView] application, google for this.

Edit Link - Blue screen of death (STOP error) information in dump files.

Description
===========

BlueScreenView scans all your minidump files created during 'blue screen
of death' crashes, and displays the information about all crashes in one
table. For each crash, BlueScreenView displays the minidump filename, the
date/time of the crash, the basic crash information displayed in the blue
screen (Bug Check Code and 4 parameters), and the details of the driver
or module that possibly caused the crash (filename, product name, file
description, and file version).
For each crash displayed in the upper pane, you can view the details of
the device drivers loaded during the crash in the lower pane.
BlueScreenView also mark the drivers that their addresses found in the
crash stack, so you can easily locate the suspected drivers that possibly
caused the crash.

atb

Law-II

 

my system keeps on crashing. (blue screen)

Hello Harrison,

A stop error (also called a "blue screen" error) can occur if a problem causes your PC to shut down or restart unexpectedly. These errors can be caused by both hardware and software issues.

To better assist you with your concern, I'd like to know the following:

• Confirm which build is currently installed on your device. To check, follow the steps below:

• Press Windows key + R, then type in winver.
• Click OK.

• Were there any recent changes made prior to this issue?
• What is the make and model of your device?

Meanwhile, we recommend performing the suggested steps in this article to troubleshoot blue screen issues
on Windows 10.

Looking forward to your response.

Regards.

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??