Windows 10: New PC BSOD

Hi, I have been building a new PC and have had quite a few issues with windows crashes. I did a fresh install of Windows, wiped all drives, and installed gpu/mobo drivers, updated the BIOS, did all Windows updates, and began to install software.I had discord and steam installed, and was downloading a game on steam. During this time, I followed a link, and copied and pasted it into a discord chat. The PC froze and bluescreened. I don't have the knowledge to know what the minidump file is pointing to as the problem/s, so it's attached here:https://1drv.ms/u/s!ApzqrzAKyj0VgSHEt8ltR5LR0qP2?e=HpK7g

:)

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

Pc bsod to bios

Currently replying on iPhone, I’ll give you a proper timeline Step 1) during the program of tuneup plus my pc bsod 3 times but I was finally able to get the info Step 2) Restore point was easy and done quick which now leads to step 3 Step 3) After starting the WDV my pc bsod with the stop code of “System thread exception not handled” following the steps I open command prompt and tried to turn it off which says that nothing was changed, so then after a couple of bsod’s later I manage to go back to my restore point which now leads to a problem I cant seem to fix where when I try to open my pc it says something is wrong with my pin with error code (0x80090016) If needed I do have the tuneup plus info Trying to solve the pin problem if anyone suggestions please inform me.

 

BSOD help with new PC

Hi,

My new PC (Win 10) has a BSOD every few minutes with a DPC Watchdog violation.

I've followed a number of the typical debug steps:

• Updated drivers inc. chipset and graphics
• In device manager checked IDE ATA/ATAPI controllers, the driver is storahci.sys and I've tried to updated using the Standard SATA AHCI Controller on my PC
• No external devices are attached
• removed AV
• Disabled Sound drivers in device manager

Still the problems are occurring frequently. I have a minidmp file here: Microsoft OneDrive

and there is also a 700MB memory.dmp that I can share if it is helpful?

Grateful for any advice that anyone can share. Thanks in advance.