Windows 10: Need Driver for Stratford Labs GFP - 001 Digital Image Copier

FrederickSchrickel · Oct 25, 2019

Need Windows 10 Driver for Stratford Labs GFP - 001 Digital Image Copier.

:)

Brink · Oct 25, 2019

Credential Guard lab companion

If you have heard about Credential Guard in Windows Server 2016 (and in Windows 10), but do not have an environment to try it out, here is a lab environment we built for you to play.

Lab access

The link will lead you to a sign up page, after that, you will see the following labs listed for Windows Server 2016:

Windows Server 2016 labs

There are 3 exercises in the “Implementing Breach Resistance Security in Windows Server 2016”:

Credential Guard

Remote Credential Guard

Device Guard

This blogpost will walk you through the Credential Guard lab details.

After click on the link of Breach Resistance lab, you be required to sign in and then you can launch the lab:

Sign-in

Launch page

It takes a few minutes to create the VMs, and once it has done, you will see the following machines prepared:

Initialize

DC: domain controller, which is not used for this exercise.

SRV01 and SRV02: both are Windows Server 2016, and used for the lab exercise.

Lab exercise – Explained

The steps are listed in the Content section:

Content

This lab is structured to cover the following in sequence:

Understand how attackers can use the hash in memory to gain access to domain controllers

Configure Credential Guard

Verify the hash in memory is protected using Credential Guard

You can follow the steps listed under the content section to complete the lab, the intent of the blog, is to break the procedures into groups, to help you understand the exercise better.

Prep the hash

Lsass.exe is the process which handles user logon, it stores the user credential information in its memory. The memory is cleared when the machine starts up. In this lab environment, all the virtual machines start at the time lab launches, when you logon to the machine, you will only have the logon user credential information in memory. In order to demonstrate an attacker gaining user access using other account’s hash, the first part of the lab is to simulate a server which has been running for a while, different users had remotely or locally connected to it, therefore, lsass memory stored many different user credential information.
This is accomplished by step 1-8.

Retrieving credential hash

Mimikatz is a popular tool for retrieving lsass memory information. The tool has been copied to the lab machines, step 9-13 walk you through the process of dumping lsass memory using Mimikatz.

Pass the Hash

Pass the hash is a hacking technique that allows an attacker to authenticate by using the underlying NTLM, instead of specifying the user password. In step 14 to 24, you will extract LabAdmin hash from lsass using Mimikatz, and use the hash to open a PowerShell console, and perform a couple of operations using the LabAdmin privilege:

Add a user to the domain admin group

Open remote PowerShell connection to a domain controller

Both operations could not be performed by the logon user. But using the hash of the LabAdmin, an attacker will be able to do it using the information retrieve from Lsass memory.

Configure and verify Credential Guard

Step 25 to 36 illustrate the steps to configure credential guard, then verify its status using msinfo32.exe and PowerShell.

Step 37 to 43 goes further to use Mimikatz to show the hash in Lsass is now encrypted using Credential Guard.

More info

The exercise illustrated the benefit of Credential Guard in Windows Server 2016 as well as Windows 10. For more information, you can find here.
Click to expand...

Source: Credential Guard lab companion Datacenter and Private Cloud Security Blog

See also:

Enable or Disable Credential Guard in Windows 10 Windows 10 Security System Tutorials

Verify if Credential Guard is Enabled or Disabled in Windows 10 Windows 10 Security System Tutorials

Xylee Del · Oct 25, 2019

Re-installing Digital Image Pro

Hello,

Windows 10 may have encountered a software corruption that caused this issue. For us to better assist you, kindly answer the following questions:

What changes have you made on your computer that caused you to perform a system restore?

What error message are you getting whenever you try to install Digital Image Pro?

Did you purchase Digital Image Pro from the Windows Store?

Meanwhile, we suggest that you access safe mode on Windows 10 by following the steps on this

link and follow the section that says From Settings. Once on safe mode, try to install Digital Image Pro and see if you'll encounter any issues.

We'll be waiting for your reply.

felipaopl · Oct 25, 2019

Unlocked Realtek HD Audio Drivers Windows 7 & 8 (With Dolby Digital Live and DTS Interactive)

I just installed W10 build 10547. Unfortunately, I still can't choose DTS interactive, saying the device does not support it. My Asus P8z77-v motherboard is supposed to have it supported, so something is definitely still not fixed.
(Optical to panasonic dolby digital / dts receiver) realtek driver 6.0.1.7535
Click to expand...

Wait, but have you done the whole step-by-step guide described in the OP? DDL/DTS isn't supported natively by Windows 8/8.1 either, unless if you do the steps listed there.

Windows 10: Need Driver for Stratford Labs GFP - 001 Digital Image Copier

Need Driver for Stratford Labs GFP - 001 Digital Image Copier

Need Driver for Stratford Labs GFP - 001 Digital Image Copier

Need Driver for Stratford Labs GFP - 001 Digital Image Copier

Need Driver for Stratford Labs GFP - 001 Digital Image Copier - Similar Threads - Need Driver Stratford

Microsoft Digital image

Digital Image

How to extract .001 files

Digital Image 2006

Digital Image 2006

Slow copier?

Microsoft digital image

samsung magician need digitally signed driver

Feedback Lab?

Users found this page by searching for:

nu vot

how to use straford labs gfp-002 on windows 10

stratford labs GFP-001 Digital Image Copier driver