Windows 10: My pc monitor keeps losing signal.

So it just somtimes randomly loses signal and then mabye a minute later it comes back on. It very stranger I have tried reseting pc and also checked to see if any loose connections.all driver are updated I am so confused.when I boot up just before the login screen it loses signal then a minute or 2 later it comes back.i have also checked ram and reseted it. My motherbord is msi xpowerz270 titanium Cpu is i7700kGpu is gtx1070 Can it a be a faulty hardware componantAlso is it normal for the motherboard to cycle through codes 54-58 and 40-60 it cycles through all the number I between.

:)

 

PC loses signal to monitor


While I play a video game, FPS in game start dropping and the monitor loses signal, but the PC is still working. Today I tried the thingy with Capslock and after I pressed it two times, my PC stopped. After I turned it back on it booted, but a black screen appeared and not the logo and after that it rebooted itself and now it's working. I can't play video games at all anymore.

My CPU is i5-3450 3.10 and graphic card GTX 650.

I had this problem even on previous version of windows.

I can watch movies and videos on chrome fine, but when I play games the hell unleashes.

Please help me *Sad.

 

GTX 1050 ti Monitors Lose Signal

So far there's been a catalogue of symptoms, and the worrying thing is there are literally pages and pages of the same issue with GTX 1050's on the GeForce forums.

Symptoms so far:

• After getting to the logon screen, both my 4K monitor (plugged in via DP) and my 1080p monitor (plugged in via HDMI) spuriously lose signal for ~5 seconds then come back. This happens constantly with no apparent timing.

• Whenever I open a game launcher (not a game), or Google Chrome, the screen flickers again, only this time I get a Windows 10 event alert saying "application has been blocked from accessing graphics hardware".

• When I check event viewer System logs, the yellow triangle simply says "nvlddmkm stopped responding" in each case of the monitors losing signal.

Attempted fixes from numerous threads:

• Installed the latest Game Ready "stable" drivers, installed latest "beta" drivers, and also installed some random "stable" drivers from a month ago. Uninstalled previous drivers with DDU each time and restarted before and after installation. Issue seems to persist sporadically.
• Turned PCI Power Management off in Windows Power Settings. No change.
• Switched Power settings in NVidia Control Panel to Maximum Performance. No change.
• Gone into the registry and added a QWord(64bit) to CurrentControlSet001/Graphics/Drivers called "TdrDelay" and set it to 8 (also tried 10). No change.
• Tried unplugging the secondary monitor. Managed to play Warframe for an entire evening without a monitor signal loss.
• Switched secondary monitor to DVI Single Link cable to 1050 ti, and also tried secondary monitor on iGPU with primary monitor on 1050 ti. Still get signal losses on main monitor, secondary monitor does the same but is delayed (WTF?).
• Downclocked GPU 50Mhz. No change.
• Increased Power Limit by 5%. No change.

Fixes I still need to try:

• Try a different DP cable in main monitor/try HDMI cable instead.
  
• I get the signal loss when I open Chrome, going to turn off hardware acceleration as that apparently solves things
• Use a DWord(32bit) registry key instead of QWord for TdrDelay
• Going to try the 375.50 drivers, as they're allegedly old but stable for low power Pascal GPUs.
• Resetting CMOS for whatever reasons - some random guy said this solved his issues.

Fairly convinced it's not a hardware issue since there are so many people with the same issue as me. One slight glimmer of explanation is that Micron memory may be at fault, I need to check if its Samsung or Micron stuff on mine. Apparently there were some GTX 1070 stability issues with Micron VRAM that were fixed with an update.

My entire system has been stable for years, sporting a R9 295x2 up until 6 months ago with no stability problems. Doubt it's PSU related. Motherboard is also on the latest 2.50 BIOS.

Help me TPU, you're my only hope.

 

Monitor loses signal while in idle

Monitor keeps losing signal after idiling for awhile after I did the Windows 10 update a few days ago. I have checked for updates and keeps saying up to date. I have to turn it off and restart it twice each time to get it back up. How can I fix this?