Windows 10: My pc keeps booting into bios and when I leave bios it just boots back into bios

so i tried to update my bios today and it worked but when the PC restarted itself it now only boots into bios

:)

 

Slow BIOS boot

Dear Taiga17x,

Welcome to the Microsoft Community



Thank you for reaching out to us and providing detailed information about the issue you're experiencing with your PC's boot-up time. It sounds like you've taken some proactive steps to troubleshoot the problem, and I'm here to assist you further in resolving this matter.

Based on the description you've provided, the increase in boot-up time following the overclocking attempts with MSI Afterburner is indeed concerning. It's possible that the changes made during the overclocking process may have inadvertently affected the system's stability or BIOS settings, leading to the observed delay during boot-up.

The only thing worth checking on the Windows side for long boot times is the boot self-startup items, which you can disable in the task manager to optimize boot speed. The other factors focus on the computer hardware and BIOS settings, here are some additional steps you can take to address this issue:

Disclaimer: If you are going to modify BIOS Settings (such as resetting CMOS and resetting the BIOS button), please back up all your personal files first to ensure you do not lose data.

1. BIOS Configuration Check: Ensure that all BIOS settings are optimized for stability and performance. You mentioned restoring BIOS settings to optimized defaults, which is a good first step.
   
   If your BIOS didn’t save the RAM timings after training, it could result in a slow boot time. There’s a BIOS setting named “Memory Context Restore” that could potentially cause this issue if it’s set before the first boot after adding new RAM. A CMOS reset should remove this option if it’s set.
   
2. BIOS Update: Check if there are any BIOS updates available for your motherboard. Manufacturers often release updates to improve system compatibility, stability, and performance. However, exercise caution and follow the manufacturer's instructions carefully when performing a BIOS update.
   
3. Boot Sequence Optimization: Review the boot sequence configuration in the BIOS settings to ensure that the system is prioritizing the correct boot devices. Sometimes, incorrect boot device prioritization can lead to longer boot-up times.
   

If after performing these steps you're still experiencing prolonged boot-up times, it may be worthwhile to consider seeking assistance from a professional technician or contacting MSI support for further guidance, especially considering the overclocking aspect.

I hope these suggestions help in resolving the issue you're facing. Please feel free to reach out if you have any further questions or require additional assistance. I'm here to help!



Best Regards,

Martin | Microsoft Community Support Specialist

 

bios keeps switching my boot drive

If your NVMe drive is not showing up in the boot priority list, it's possible that the BIOS settings may need to be adjusted. Here are a few things you can try:

Make sure that your NVMe drive is properly installed and recognized in the BIOS. Check to see if it appears in the list of storage devices in the BIOS.

Check to see if there is an option to enable NVMe support in the BIOS. This option may be located in the storage or boot options.

Check the boot mode setting in the BIOS. If your NVMe drive is using the UEFI boot mode, make sure that the boot mode setting in the BIOS is also set to UEFI.

Check to see if there is a firmware update available for your NVMe drive. Some firmware updates can improve compatibility with certain systems and may resolve boot issues.

Try resetting the BIOS to its default settings. This can sometimes resolve issues with boot priority and may allow your NVMe drive to be recognized.

If none of these steps work, it may be worth contacting the manufacturer of your motherboard or NVMe drive for further assistance.

 

Pc boots to Bios only

Hi Michele,

Since your computer can only boot to BIOS, we suggest contacting your device manufacturer to check the boot sequence. If your under UEFI BIOS your boot sequence should be on hard drive or boot manager to make sure that the computer is booting up on the
correct settings.

Get back to us if you need further assistance.