Windows 10: My computer is booting into BIOS and I cannot leave.

On boot up I see "Media test failed check cable" I have no idea what this means and the computer was working fine a couple of weeks ago.

:)

 

bios

Hi all i am new in this forum, i need meanings step by step of each item listed in the bios Phoenix-Award

 

Slow BIOS boot

Dear Taiga17x,

Welcome to the Microsoft Community



Thank you for reaching out to us and providing detailed information about the issue you're experiencing with your PC's boot-up time. It sounds like you've taken some proactive steps to troubleshoot the problem, and I'm here to assist you further in resolving this matter.

Based on the description you've provided, the increase in boot-up time following the overclocking attempts with MSI Afterburner is indeed concerning. It's possible that the changes made during the overclocking process may have inadvertently affected the system's stability or BIOS settings, leading to the observed delay during boot-up.

The only thing worth checking on the Windows side for long boot times is the boot self-startup items, which you can disable in the task manager to optimize boot speed. The other factors focus on the computer hardware and BIOS settings, here are some additional steps you can take to address this issue:

Disclaimer: If you are going to modify BIOS Settings (such as resetting CMOS and resetting the BIOS button), please back up all your personal files first to ensure you do not lose data.

1. BIOS Configuration Check: Ensure that all BIOS settings are optimized for stability and performance. You mentioned restoring BIOS settings to optimized defaults, which is a good first step.
   
   If your BIOS didn’t save the RAM timings after training, it could result in a slow boot time. There’s a BIOS setting named “Memory Context Restore” that could potentially cause this issue if it’s set before the first boot after adding new RAM. A CMOS reset should remove this option if it’s set.
   
2. BIOS Update: Check if there are any BIOS updates available for your motherboard. Manufacturers often release updates to improve system compatibility, stability, and performance. However, exercise caution and follow the manufacturer's instructions carefully when performing a BIOS update.
   
3. Boot Sequence Optimization: Review the boot sequence configuration in the BIOS settings to ensure that the system is prioritizing the correct boot devices. Sometimes, incorrect boot device prioritization can lead to longer boot-up times.
   

If after performing these steps you're still experiencing prolonged boot-up times, it may be worthwhile to consider seeking assistance from a professional technician or contacting MSI support for further guidance, especially considering the overclocking aspect.

I hope these suggestions help in resolving the issue you're facing. Please feel free to reach out if you have any further questions or require additional assistance. I'm here to help!



Best Regards,

Martin | Microsoft Community Support Specialist

 

Windows cannot be installed to this disk. This computer's hardware may not support booting to this disk. Ensure the disk's controller is enabled in the computer's bios menu.

Hi Matthew,

There are several possible reasons as to why your computer is not detecting an SSD drive. This could be caused by incorrect BIOS settings or device drivers that need to be updated. Since you already tried the suggestion of Andre Da Costa and this allowed
your computer to detect the SSD already, we would like to further clarify your concern by asking the questions below:

• If you were already able to install Windows on the SSD, have you already attempted to change the boot order in the BIOS menu?
• Which version of Windows did you install on the SSD?
• What other troubleshooting steps have you attempted?

We look forward to your response to our queries.