Windows 10: Media Creation Tool USB won't boot

USB created with MediaCreationTool22H2 for W10 won't boot on a New Ryzen 7950X ASUS X670E. I had to use rufus and create a bootable USB from a 22H2 ISO. Pretty sad MS when you can't get your own creation tool to work...

:)

 

Media Creation Tool Failed

First of all it’s a desktop, two I can’t even get to the OS (clean SSD, USB tool)

I have already exhausted all the garden variety troubleshooting steps listed for the various errors I have received so far.

None of them were particularly helpful for cases where can get into the OS or open the media creation tool…

POST --> F12 --> Boot Menu --> Win10 Pro 64bit Media creation tool --> Enter --> Loads --> POST’s --> Blue Screen*

*(3 out of 4 errors, 1962 is just a lack of OS on drive)

I'm thinking its an bad system board

PS I'm a computer repair tech

 

Windows 10 USB boot

Hi there, am not a windows 10 expert. I have a pc in the bedroom on windows 10, I messed up the bootloader trying to fix the xp on that system.

System wont boot, trying to repair via win 10 usb installer.

Downloaded the media creation tool to install windows 10 installer on usb stick. Not compatible with a host of usb sticks I have. Tried the usb sticks that others use, but I think they use rufus; as the media creation tool by win 10 does not detect the usb stick.

So quick question, the win10 machine i am trying to repair the bootloader is a win7 upgraded to win10.
If i were to use the usb win10 installer to "repair installation" does the version of the iso downloaded via the media creation tool matter?

There is three options:
Windows 10
Windows 10 Home
Windows 10 N

Also is there a step by step instead of using rufus as I want to try an alternative method of creating a usb win 10 installer. Preferably with more compatibility.

System is a asus sabertooth 990 (r2?) with AMD phenom X 6.

Also is there any other software I can load onto the usb that can repair the bootloader easily?
That would be the ideal alternative. Thanks

 

Windows 10 Won't Boot, and I can't get the Media Creation Tool onto a USB drive

Hi,

Thank you for contacting Microsoft Community.

The USB drive should be formatted and empty, then you can create the medic creation tool as below and check if it helps.

You may use the below Windows 10 ISO link to download the tool and check create the installation media.

https://www.microsoft.com/en-us/software-download/windows10

• Run the media creation tool.
• Select Create installation media for another PC.
• Choose the language, edition, and architecture (64-bit or 32-bit) for Windows 10.
• Follow the steps to create the installation media, and then select Finish when it’s done.
• When you’re ready to perform a clean installation, turn on your PC, insert the
  DVD or USB flash drive you created, and then shut down your PC.
• Restart your PC, and then press any key to boot from the DVD or USB flash drive.

Hope this information is helpful and do let us know if you need further assistance. We will be glad to assist.