Windows 10: Laptop does not fully use gpu no matter the setting!!!

Windows is absolute garbage and will NOT use my dedicated gpu to its full extent while gaming even though its set to use the nvidia card in the control panel and graphics settings!!! Oh wow but magically when i use linux their gpu switcher will use my gpu 100%!! Please help me fix this bullsh*t

:)

 

How do I make the primary display adaptor as the dedicated GPU instead of the intel integrated on my laptop?

Thanks for reaching out! I'm an Independent Advisor and a Microsoft user like you.

To make the dedicated GPU the primary display adapter on your HP Pavilion 15-e033tx laptop, you can follow these steps. Note that the process involves both software settings within Windows and potentially BIOS settings, though the latter may not always be available on all laptops.

Method 1: Using Device Manager

1. Open Device Manager:
   
   • Press Windows + R, type devmgmt.msc, and press Enter.
     
2. Disable Integrated Graphics:
   
   • Expand the Display adapters section.
     
   • Right-click on the Intel integrated graphics and select Disable device.
     
   • Confirm any warnings that appear.
     

Method 2: BIOS Settings

1. Access BIOS:
   
   • Restart your laptop and press the appropriate key (usually F2, F10, Delete, or Esc) to enter the BIOS setup. The exact key may vary, so refer to your laptop's manual if needed.
     
2. Change Primary GPU:
   
   • Navigate to the Advanced or Integrated Peripherals section.
     
   • Look for settings related to Graphics Configuration or Primary Display.
     
   • Set the primary display to PEG/PCI or a similar option that prioritizes the dedicated GPU over the integrated one.
     
   • Save and exit the BIOS.
     

Method 3: Windows Graphics Settings

1. Open Graphics Settings:
   
   • Go to Settings > System > Display.
     
   • Scroll down and click on Graphics settings.
     
2. Set Preferred GPU:
   
   • Under Graphics performance preference, select the application you want to configure.
     
   • Click Options and choose High performance to use the dedicated GPU.
     

Troubleshooting

• Check for Driver Issues:
  
  • Ensure that both Intel and AMD drivers are up to date. Sometimes, outdated drivers can cause conflicts.
    
• BIOS Limitations:
  
  • If your BIOS does not provide an option to change the primary GPU, you may be limited to using software settings within Windows.
    
• Windows Basic Display Adapter Issue:
  
  • If disabling the integrated GPU in Device Manager causes Windows to default to the basic display adapter, re-enable the integrated GPU and try setting the preferred GPU for specific applications instead.
    

By following these steps, you should be able to set your AMD GPU as the primary display adapter, improving overall performance and allowing for better resolution settings.

If the above steps aren't working, it's probable that your laptop doesn't have a mux switch.

Please do let me know if the method I suggested works for you or if you need further assistance.

 

Custom Driver : Intel HD Graphics & ATI Combo (Alpha) - by nIGHTmAYOR

according to laptop support page they do list an old downloadable driver for intel for windows 7 , weather this is related to there being several variants of that laptop or this laptop has switchable graphics i may just suggest you reset the bios and see if things change , if yes you may be able to apply step 2 , if not then apply step 4 and call it today , you are still better off being on the high performance gpu .

Out of curiosity can you take a snap shot from Settings > System > Display. Scroll down and click the “Graphics Settings” ?

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.