Windows 10: KB5041585 - Print Spooler issues

After update KB5041585 on 15 August 2024, the services of print spooler keep crashing,i try to bring back, but when i try to print again, the service keep crashing.i already try to deletes all files in this folder C:\WINDOWS\System32\spool\PRINTERS andtry reinstall drivers printer.but the services print spooler keep crashing.

:)

 

Print Spooler Issue

Hello Sree,

For step by step instructions on how you can manually start the Print Spooler Service, follow these:

• Click Windows tab.
• Type Control Panel > System and Maintenance
  > Administrative Tools.
• Double click Services.
• Right click to the Print Spooler service > Properties.

However, we suggest you can refer to an answer given by Prabhavathi Patil on this

thread.

We also recommend that you update the driver for your printer.

Let us know if you need further assistance.

Thanks.

 

Issue after installation with print spooler

Hello,

Thank you for keeping us posted.

I certainly understand your concern and will try my best to help you.

I really appreciate all your efforts in trying to fix this issue.

I would suggest you to try the steps given below and check if that helps.

Note: All the steps mentioned below holds good for windows 10 as well.

If print spooler keeps stopping in Windows 8.1,
I would suggest to follow the steps given below.

• 
  If the print spooler is not responding to your print commands and print is not happening when printer is fine physically (No paper jam or any error indications on printer hardware). These methods will help
  to clear the pending print jobs (print queue) and hanging spooler service.
  
• 
  Clear the print spooler files where the Operating Systems store printing jobs temporarily, deleting these file will allow the print spooler to start freshly and run smoothly next time.
  
• 
  Go to C -> Windows -> System32 -> Spool -> Printers and delete all files inside this folder. This is the location OS keeps the printing jobs before sending
  to printers. Once you delete these files, print queue will be cleared. The same location is applicable for latest Windows 8 and 8.1 too.
  

If the problem persists, follow the steps given below.

• 
  Go to services under Computer Management.
  
• 
  Double click Print Spooler service and go to
  Recovery tab. Here we can set what that service should do when it fails.
  
• 
  Select ‘Restart the Service’ in Subsequent Failures field. So, it will try restarting print spooler service whenever it fails.
  
• 
  Go to ‘Dependencies’
  tab and make sure all depending services are started. Luckily, only one dependency service for print spooler service which is
  Remote Procedure Call (RPC) service.
  
• 
  Check the RPC service in services and make sure it’s already started.
  

If the issue still persists, the last step would be to check for the printer drivers. If the printer drivers are not installed properly, I would suggest you to follow the steps given below and check if that helps.

• 
  Delete all unwanted printers from your computer.
  
• 
  Make sure all printers are installed with proper drivers.
  

Additional Information:

Please refer to the article given below and check if that helps.

Fix printer problems

Fix printer connection and printing problems in Windows - Microsoft Support

Note: The above article will
help you identify and fix common printer problems in Windows. Printing problems can be caused by cables that aren’t connected properly, problems with wireless adapters or settings, damaged or incompatible printer drivers or missing updates.

I hope this information is helpful.

Please do let us know if you need any further assistance, we will be glad to assist you.

Thank you.

 

Must restart Spooler to print

Have you set the Print Spooler server to Automatic? If you haven't, then let's do it. Follow the steps below:

• Open Services through the search box.
• Locate Print Spooler service and double click it.
• Once the Print Spooler Properties window is open, look for Startup type and set is to
  Automatic.
  
• Check also the Service status and make sure that it is set to Started.
• Click Apply, then OK.

In case there are other printers installed on your PC that you no longer use, we suggest that you uninstall it as it may also cause some issues with Print Spooler.

Looking forward to your reply.

Regards