Windows 10: I can't open my PC, and my key ID is F5963636, Drive Label : DESKTOP-PNH3OCR 2015/9/19.

I can't open my PC, and my key ID is F5963636, Drive Label: DESKTOP-PNH3OCR 2015/9/19. And my email is *** Email address is removed for privacy ***

:)

 

Mismatched drive labels in windows.

Hi, I’m Nicole, I’ll be happy to help you out today.

It sounds like there may be an issue with the labeling or identification of your Samsung 980 PRO drives in Windows 11. There are a few potential causes for this issue, including incorrect driver installation, driver conflicts, or a hardware issue.

Here are some steps you can take to troubleshoot the issue:

Check the device manager: Open the Device Manager in Windows 11, and expand the "Disk drives" category. Check to see if both Samsung 980 PRO drives are listed, and whether they are correctly labeled. If they are not listed or incorrectly labeled, try updating or reinstalling the driver for the drives.

Check the BIOS: Restart your computer and enter the BIOS setup. Check to see if both drives are detected by the BIOS and whether their labels are correct. If they are not detected or labeled correctly in the BIOS, it may indicate a hardware issue.

Reinstall Windows: If the above steps do not resolve the issue, you may need to reinstall Windows 11. During the installation process, make sure to select the correct drive to install Windows onto, and ensure that both drives are properly detected and labeled.

If you continue to experience issues with mislabeled drives, you may want to contact Samsung support

Regards.

 

Help me to get Bitlocker Recovery Key for my HP Envy ID 48DAE16A, drive label DESKTOP-6AQ6QMK C-5/03/2020

Dear Sir/Madam,

Help me to get Bitlocker Recovery Key for my HP Envy ID 48DAE16A, drive label DESKTOP-6AQ6QMK C-5/03/2020

Thanks and Best Regards

Miroslav

 

Can't open USB drives, Windows 10, code 19

I am having a bizarre problem with my USB ports on my computer. They aren't working. I have 4 ports, and the only device that works in any of them is my mouse - an older Razer Death Adder 3.5G. If I plug any other device in, Windows plays that nice "connecting" sound, then instantly plays the rude "disconnecting" sound and disconnects. Sometimes it connects/disconnects a few times. Afterwards I go to device manager and, if the device is a external drive I get the error under the Storage controller section, and if it was a mouse, I get the same error under the Human Interface Devices section.

Error:

I have looked at the registry following the advice given on other questions, but none of the registry keys suggested have UpperFilters or LowerFilters that were values that should be deleted.
Here are a couple of the keys I checked.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e978-e325-11ce-bfc1-08002be10318}

Anyone have any suggestions?

Edit:

I am able to make my devices work, if after they are plugged in and I am shown the yellow exclamation mark, I follow these steps. However, once I unplug/plugin again I have to go through these steps again. Sometimes device manager doesn't find the device automatically and I have to right click and "scan for hardware changes."

• Right click on the device.
  
• "Update driver".
  
• "Browse my computer for
  driver software".
  
• "Let me pick from a list of available drivers on my
  computer".
  
• Then, in the list of available drivers I can choose the
  appropriate one.
  
  • For a mouse: "USB Input Device".
    
  • For a HDD: "USB
    Attached SCSI (UAS) Mass Storage Device".
    

That works, but if I have to do that every time I plug anything in, it is going to get tiresome.