Windows 10: How do I install the HID compliant touchscreen driver that I need for my windows surface pro-4

I just got my windows surface pro 4 because I wanted a tablet. However, the touch screen is not working and I checked on device manager and the HID compliant touch screen driver was not there. How can I install it?\

:)

 

driver for hid touchscreen compliant

Unfortunately , for the last several months all the suggestions listed I have tried. The realization is that the hid compliant touchscreen is not there anymore under the human interface devices or any where else. Which means there should be a driver
for firmware that actually downloads to someone's computer to get the touchscreen back. which is what is needed you. I followed the directions and the hid compliant touchscreen disappeared. My question is if there is software, firmware, driver or what
ever that can be directly sent to download to my computer to get hid compliant touchscreen back to the device manager.

 

Surface Pro 4 Missing Hid touch screen driver

Disable and enable the touchscreen driver

Note

You'll need a keyboard or mouse connected to your Surface, as in Solution 2.

If a two-button shutdown doesn't work, try this:

Select the search box in the taskbar, enter device manager, and then select Device Manager in the search results.

Select the arrow to the left of Human Interface Devices.

Right-click HID-compliant touch screen, and then select Disable.

Right-click HID-compliant touch screen, and then select Enable.

Note

There may be more than one HID-compliant touch screen listed. If so, complete steps 3-4 for each one.

Solution 6: Reinstall the touchscreen driver

Note

You'll need a keyboard or mouse connected to your Surface, as in Solution 2.

If disabling and re-enabling your touchscreen driver doesn't work, try this:

Select the search box in the taskbar, enter device manager, and then select Device Manager in the results.

Select the arrow to the left of Human Interface Devices.

Right-click HID-compliant touch screen, and then select Uninstall.

Note

There may be more than one HID-compliant touch screen listed. If so, complete steps 3-4 for each one.

Restart your Surface.

Your Surface will automatically download and install the touchscreen driver when you connect to the Internet.

Solution 7: Reset touchscreen calibration

Note

You'll need a keyboard or mouse connected to your Surface, as in Solution 2.

If solutions 1-6 didn’t work, recalibrate the touchscreen:

Press the Windows logo key .

(If you're using a mouse, select Start .)

Enter calibrate, use the arrow keys to highlight Calibrate the screen for pen or touch input, and then press Enter.

(With a mouse, select Calibrate the screen for pen or touch input.)

Press the Tab key until the Reset button is selected, and then press Enter.

(With a mouse, select Reset.)

If the Reset button is dimmed, your Surface touch calibration is still at factory settings. Skip to Solution 8.

Press the Tab key until the Yes button is selected, press Enter, and then follow the on-screen instructions.

(With a mouse, select Yes, and then follow the on-screen instructions.)

After your Surface removes the recalibration data, test the touchscreen to see if it responds appropriately.

If none of the above work...

Open Start, type: regedit

Right click regedit

Click Run as administrator

Navigate to HKEY_CURRENT_USER\Software\Microsoft\Wisp\Touch

Change the TouchGate value to '1'

Exit then restart.

 

driver for hid touchscreen compliant

hid compliant touchscreen driver or firmware needed to be downloaded for touch screen to work again. please advise