Windows 10: HID-compliant touch screen and I2C HID Device problems

My touch screen doesn't work! I tried enabling the HID-compliant driver but it didn't work. I tried uninstalling it and resetting the laptop but it didn't reappear. I reinstalled Windows but the driver and other ones didn't appear. How can I download the new one and turn on the touch screen again? I have also found that there's a problem with I2C HID Device. Can you help me with that?

:)

 

Uninstalled KMDF HID Minidriver for Touch I2C Device


I recently upgraded to windows 10, and have had problems with my touchscreen driver. When I touched on the screen or on a capacitive button, the area of the screen that the actual finger touch effected was less than the total area of the screen. On boundaries random things happened. I uninstalled a "KMDF HID Minidriver for Touch I2C Device" driver, which has obviously stopped the touchscreen from working. I'm using a Chuwi Vi10, but this is probably irrelevant. I already have another one that is working perfectly, also running windows 10. It lists both a "HID-compliant touch screen" and the "KMDF HID Minidriver for Touch I2C Device" that the other tablet does not have. I can't find a way to reinstall this driver, as every time the automatic driver update search for the unknown device fails, and I can't find the manufacturer (Silead) on the list of drivers.

Any ideas on how I could get the working driver of the working (identical) tablet on the driverless one? Essentially I just need to be able to get the touchscreen working which is the only thing not functioning after the update to windows 10. I haven't been able to roll back to windows 8 either.

 

Touch screen stops working -I2C HID device error

I have a LG gram laptop 16T90P-KAAE7UI running windows 11. In the last few months, touch screen has been intermittely stopping working. The device manager always showed there was an error in I2C HID device - This device cannot start (code 10). Usually, I could recover by doing one of the following things:

• disabling and enabling the device,
  
• simply rebooting the system or
  
• uninstalling the device and then restart the laptop.
  

Today, after pushing the sleep button on the side of the laptop and then pushing it again to wake up the laptop, touch screen completely stopped working. None of the methods mentioned above works. Touch screen function refues to work and device manager always shows that I2C HID device cannot start (code 10). The following message appeared with recovery attempts

• A request for the HID descriptor failed (most often), or
  
• The device failed the SET_POWER command, or
  
• One byte was expected in the report descriptor but not found
  

I also did update from Windows update and LG update center. All things have been updated to date. No luck to make touch screen work again.

Touchpad always works without issue. What else can I do to fix the I2C HID device error and bring touch screen back to work?

Thanks.

 

HID-Compliant touch screen is no longer in my device manager

Hi Tisha21

I was lucky to solve the HID touch screen problem on my labtop in this way:

Computer Management / Device Manager / System Devices

Under System Devices, I started clicking update drivers for each and every system device on the list.
Most were already updated, but a bit down the list there was a device that was not updated.
Unfortunately, I do not remember which one should be updated, but suddenly the
HID-Compliant Touch Screen component was no longer a hidden device an the touch screen worked Again

/Thomas