Windows 10: Hi,microsoft i have ssd samsung PM9A1 pcie 4.0 nvme and when i go to device manager i see...

Hi,microsoft i have ssd samsung PM9A1 pcie 4.0 nvme and when i go to device manager i see microsoft give this ssd driver from 2006 date i think i dont use all my prower ssd with this old driver thanks

:)

 

Clone present nvme pcie ssd to replacement nvme pcie ssd?

I have a 500GB M.2 2280 NVMe PCIe SSD (boot drive) that I want to replace with a higher capacity M.2 card.

Where do I put the new SSD during the NVMe to NVMe cloning process? My mobo only has one M.2 slot for NVMe SSD's so do I want to use an external adapter for one of the M.2 cards? If so, do you have a recommendation?

If you have solved this issue for your desktop or laptop I would like your advice on if and what extra hardware you needed during the cloning.

please remember that I am dealing with PCIe NVMe drives ONLY. NO Sata is involved except possibly for a connecting cable from the desktop to an adapter. I am experienced with cloning SATA III drives but cloning NVMe is a little
new to me.

Computer: Dell XPS 8920, 32GB ram.

Present SSD: KXG50ZNV512G NVMe Toshiba 512GB

New SSD: CT13049074 Crucial P1 NVMe PCIe M.2 SSD 1TB (or 2TB if available soon) or similar storage device.

Windows 10 Pro for Workstations, version 1809.

 

M.2 NVME pcie gen 4

Does anybody know if Samsung is releasing a Gen 4 PCIe NVME SSD? I'm just wondering.

 

HDDs attached to PCIe SATA expansion card not showing in Windows 11 Device Manager or Disk Management

Three hard drives are connected to 3 SATA ports on a PCIe SATA expansion card on an ASUS ProArt Z690 Creator motherboard, with Windows 11 Pro, and I don't see those drives in the Device Manager. I want to assign letters to each of these 3 hard drives and make use of them. In the Device Manager I find my 4 NVMe SSDs and one Western Digital HDD listed under Disk Drives. The active SATA ports on the motherboard are occupied by three optical drives and one Hdd. The other three HDDs connected to the SATA ports on the PCIe expansion card are not listed under Disk Drives. However in the Device Manager listed under "Other devices" are four PCI devices. R click on the PCI devices show PCI bus 0, and device 21 for all, and for each is shown funct 0, funct 1, funct2, and funct5. It says there are no compatible drivers for these PCI devices, no manufacturer is listed, so could these be the three HDDs attached to the SATA ports on the PCIe SATA expansion card? How can I discover the three HDDs attached to the SATA expansion card in Windows 11, and how can I get them listed as Disk Drives, and how can I find drivers for them, and how can I assign a letter to each of those HDDS and make use of the drives? Thank you.