Windows 10: Help I reset my pc and I cannot log in now!

I reset my pc and kept my folders but had accidentally chose cloud windows and I couldn’t get past load up windows 10 from volume 6 So I tried to reset again with local files praying I can fix it.

:)

 

router logs DoS attack from a local PC....

Well you did not say that you don't really know what you are doing. It's not a problem of course, but it changes things a little.

It's not even clear if the PC or the router is the problem at this time, so I suggested that you disable some unnecessary things which are usually known to cause many problems, sorry if those were too complicated.

• You could reset some network related stuffz on the PC as a next step. Open an elevated command prompt (run as administrator), and enter the followings on the PC:
  netsh int ip reset reset.log
  netsh int ipv6 reset
  netsh winsock reset
  netsh branchcache reset
  netsh advfirewall reset
  (note: You can export your current firewall rules in the "group policy" before the reset if it's needed for some reason)
  
  
• Btw, Would it be a problem to reset the router to the default settings if the things we are trying will not help? There is a menu point for that called "factory settings" (and also a little hole on the back if you prefer that one).. the Administrator username in the router after the reset would be admin and the password is probably on a sticker at the bottom of the router (special settings needed to go online with your ISP might be also necessary)
  This is not needed now (not yet), but perhaps the source of the problem is at the router and not the PC in question, so we may come to that eventually.

ps.: Do you have a second network card you could test in that PC and a different cable to rule out some hardware issues on the PC side?

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Edge Search Does Not Permit Change of Region


I got these suggestions from the Microsoft Community forum.No. 1 worked for me:

Thank you for posting the query on Microsoft Community. I am glad to assist you on this.
We have reproduce the issue here and we are able to access non-regional search for google using Microsoft Edge.
I would suggest you to try the below steps and check if it helps.
Step 1:
Clear browsing data option of Microsoft Edge and check if you face the issue. To do so perform the steps below.

1. Click on the More actions icon next to the feedback icon present on top right corner of the Project Spartan homepage.
2. Select Settings and click on Choose what to clear.
3. Check the boxes Browsing history, Cookies and saved website data and Cached data and files and click on Clear.

Step 2:
I suggest you to create a new user account and check if the issue occurs.

1. Go to Settings.
2. Choose Accounts and then select Family and other users.
3. Select add someone else on this PC.
4. Enter a user name and hit next.
5. Click on Finish.
6. Sign out from the current Account and Log into the new account.

Step 3:
It could also happen because of network issue. I suggest you to try with different network connection and check if it helps.