Windows 10: Headset microphone turns on randomly after 24h2 update

Hi, i have an issue with windows 11 24h2 update, after upgrading to it the headset mic keeps turning on by itself randomly and i noticed it umute itself when i open youtube or videos or music, generally anything that has sound, and i installed 24h2 3 times to make sure that the problem from windows, and i installed 23h2 the version i was using before and there was no problem and even installed windows 10 22h2 and there was no problem, the issue happened only on the 24h2 and i saw other people with other headsets complaining from the same issue too, also when i check listen to this device from

:)

 

Headsets microphone is not working

Hi

I'm Jen, a fellow user and an Independent Advisor.

Here's what you can try:

1. Navigate to Settings > Privacy > Microphone

2. Click the Change button, then make sure Microphone for this device is turned on.

3. Make sure Allow apps to access your microphone is turned on.

If you still continue to have the same problem after doing the troubleshooting steps, then proceed to the steps below:

1. Navigate to Control Panel > Sound

2. Select the Recording tab, then right click on any empty place inside the device list and tick Show Disabled Devices.

3. Right click the Headset Microphone and click Enable.

4. Right click it again and select Set as Default Device.

5. Right click Headset Microphone and click Properties.

6. Click the Levels tab, then drag the volume slider towards the largest value.

7. Click OK

Hopefully this resolves your issue.

 

headset microphone not working

Hi

Welcome to Microsoft community.

Given the steps you've already taken, it seems you've covered the basic troubleshooting methods. However, there are a few more things you could try before concluding that the headset's microphone is broken:

1. Test the Headset on Another Device:
   
   • If possible, plug your headset into another computer or a compatible device. This can help determine if the issue is with the headset itself or your computer.
     
2. Inspect the USB Port:
   
   • It's possible the USB port might have been damaged when the headset was tugged out. Try using the headset with a different port, which you've done, but also check if other devices work correctly in the same port where the headset failed.
     
3. Disable USB Selective Suspend:
   
   • Go to Control Panel > Hardware and Sound > Power Options.
     
   • Click on “Change plan settings” next to your current power plan.
     
   • Click on “Change advanced power settings”.
     
   • Expand “USB settings” and then expand “USB selective suspend setting”. Set it to Disabled.
     
4. Check Sound Settings in Control Panel:
   
   • Go to Control Panel > Hardware and Sound > Sound.
     
   • Under the Recording tab, right-click an empty space and make sure "Show Disabled Devices" and "Show Disconnected Devices" are checked.
     
   • If your microphone appears, enable it and set it as the default device.
     
5. Try a Different USB Cable (if detachable):
   
   • If your headset uses a detachable USB cable, the cable itself may be faulty. Try a different USB cable if possible.
     
6. Update Motherboard USB Drivers:
   
   • Sometimes, the issue might not be with the device but with the USB drivers of your motherboard. Visit the motherboard manufacturer's website to download and install the latest USB drivers.
     
7. Check if the Microphone is Disabled in BIOS/UEFI:
   
   • Although not common, some BIOS/UEFI settings might have options to disable microphone input for privacy reasons. Check your BIOS/UEFI settings to make sure the microphone or audio input is not disabled.
     
   • Disclaimer: Microsoft provides no assurances and/or warranties, implied or otherwise, and is not responsible for the information you receive from the third-party linked sites or any support related to technology.
     
     If you are going to modify BIOS Settings, please back up all your personal files first to ensure you do not lose data.
     
8. Use a USB Hub with External Power:
   
   • In some cases, the problem might be due to insufficient power being supplied to the USB ports. Using an externally powered USB hub could help in such situations.
     

If after trying these steps, the microphone still doesn't work but is recognized by your PC, it could indeed be a hardware issue with the microphone component of the headset. Given that the audio playback works fine, it points towards a problem isolated to the microphone. In such a case, contacting the manufacturer for a warranty claim (if applicable) or considering a new headset might be the next steps.

Let me know if you need further assistance.

Best regards

Derrick Qian | Microsoft Community Support Specialist

 

Headset microphone problems Windows 10

Hello Steyn,

Thank you for posting your concern in Microsoft community and welcome to the Windows 10 Family.

From the description provided, I understand that windows is unable to configure the microphone settings for your headset device.

I would suggest you to use the below steps and check if it helps to resolve the issue.

Run the Microphone Setup Wizard

• 
  Type “Set up Mic” in Cortana’s Search box.
  
• 
  Follow the instructions provided to set up your microphone.
  

Check your microphone’s drivers

• 
  Type in “Device Manager” in the Search box and select it from the list.
  
• 
  Expand Sound, video and game controllers
  
• 
  Right-click (or tap and hold) your microphone device and select
  Update Driver Software.
  
• 
  Select Search automatically for updated driver software.
  This option will scan the Internet for the correct version of the driver or determine if you already have the most recent driver installed.
  You may be prompted to restart your computer to install the driver.
  

Manually turn up the mic gain

• 
  Type in “Sound” in the Search box and select
  Sound (Control Panel) from the list.
  
• 
  Select the Recording tab.
  
• 
  Right-click (or tap and hold) on the active microphone input device and select
  Properties.
  
• 
  Select the Levels tab.
  
• 
  Manually drag the Microphone gain to a higher level and click
  Apply.
  

Write to us with the updated information. If the issue still persists we would be happy to help you.

Thank you.