Windows 10: gpu fans are not spinnin sometimes...

....thanks again all..the title says it all..while gaming my gpu fans are not spinnin sometimes..or ever..gpu clock speed is at 300mhz.iam using..rtx 2060 super gigabyte oc...+iam not getting fps as iam suppose..too..or used to.is there a way to check if gpu is seated properly..or somewhat..?...thanks in advance..

:)

 

Black Screen, GPU Fan 100% When Playing Games

Hey - I will work on the BIOS update here in the next few minutes, but I have not found moving to 42a to be helpful in the past. Here are the other answers to your questions:

a) Try later and/or earlier drivers

• I have tried the stock driver with the 1080 after a display driver resintall, the earliest patch available on NVIDIAs site, as well as the latest. None of those 3 have remedied the problem.

b) Measure the GPU's temperatures at idle and under load

• Temps never exceed 70C. Most of the time, RL crashes out before temps can even build. 70C can be seen in COD and other games as well.

c) Ensure the GPU is free from dust build up and that the fan is working correctly

• Both fans are spinning problem and the stock fan curve is active, as I can hear it ramp during COD. No dust buildup.

d) Re-seat the GPU and check all connections are securely made

• I have reseated the card in the top PCI-E slot multiple times, as well as moved it to the lower port as well. No improvement.

e) Check PSU voltages in BIOS
Here are the voltages that were available in my BIOS:

• CPU VCORE: 1.428-1.512V
• CPU VDDP: .9V-.912V
• DRAM Channel: 1.212-1.214V
• +3.3V: 3.264V
• +5V: 5.010V
• +12V: 12.168V
• VCORE SOC: .888V

Not sure if any of these are out of range or abnormal.
f) Try a different card in the system

• I have had the original Classified for ~2 years that I RMA'd, so there have been two different GPUs producing this issue. Both have been CLASSIFIED 1080s.

 

Overclocking / Undervolting guide for Vega 56 or 64?

Here's a quick laundry list:

List of software to use for overclocking and testing
Examples:
Wattman (and how to find and use it, like an overview, including profiles)
Unigine Valley or Heaven (use this for quick testing while changing settings in Wattman and checking for stability / artifacts) ...just suggesting this
How to monitor cores / mem speeds and temps during testing (I've seen screen overlays, and others using GPUz)

Step-by step overclocking in Wattman
Fan speeds
Power limit
Temp limit
Voltages
Core speeds
Memory speeds

 

Black Screen, GPU Fan 100% When Playing Games

I would suggest going back to at least the October version: