Windows 10: Getting bsods every 10-20 minutes with different stop codes

Issue has been going on for about a month now I sent my pc to be diagnosed and repaired and it worked fine for a day then started receiving blue screens again I have no clue what to do I’m not very tech savvy but would appreciate some help if I can even get my pc back on

:)

 

Unpredictable BSODs with different stop codes

Yeah that part of the post was in response to the steps zbook was having me take, not anything to do with the reasoning behind connecting to WiFi. In his steps, he asked me to reinstall the LAN driver. Is the LAN adapter just the Intel(R) Ethernet Connection (2) I219-V?

 

Several BSOD screens with different stop codes - Windows 10

I bought a new pc, few days ago. since I got it, my windows 10 crashed about 8 to 10 times already.
Each time I get a different stop code, the ones I got already was:

1. KMODE_EXCEPTION_NOT_HANDLED
   
2. SYSTEM_SERVICE_EXCEPTION
   
3. IRQL_NOT_LESS_OR_EQUAL
   
4. MEMORY_MANAGMENT
   
5. DPC_WATCHDOG_VIOLATION
   

All I could find is this question, but I don't know if his answer is the same as mine, please tell me if it is, I'll add pictures of anything needed.

Thank you for your help, in advance, it is really important.

EDIT: I updated all drivers (motherboard, nvidia gpu), and I got a new stop code after it crashed again: POOL_CORRUPTION_IN_FILE_AREA

 

BSOD with multiple stop codes

• Problem
  

The problem is that I get a blue screen of death (BSOD) frequently for a few months now, and it increases in frequency once I've had the first one. For example, if I leave my computer on for a while, it'll run normally for a few hours before I get my first BSOD. After I get a BSOD, I get a lot more afterward over the period of 30 mins - 1 hour. The stop codes I get are different every time so there's no way of saying which one I get the most.

• Problem history
  

I don't remember exactly when I had this problem or what triggered it. But at the time I hadn't changed any hardware components or installed new software. However, I used to only get the stop code IRQL_NOT_LESS_OR_EQUAL. After some attempts of troubleshooting, I started getting all the stop codes besides IRQL_NOT_LESS_OR_EQUAL to this moment. I don't remember which step exactly of troubleshooting triggered this change though.

• Specs:
  

1. Windows: Windows 10 x64
   
2. Motherboard: Asus Strix B450-F Gaming
   
3. CPU: AMD Ryzen 5 3600
   
4. Memory: Corsair CMK32GX4M2E3200C16 Vengeance LPX 32 GB
   
5. Hard disks: KINGSTON SA400S37240G / WDC WD10EZEX-21WN4A0
   
6. Graphics card: MSI GeForce RTX 3060 GAMING X
   
7. Power supply: don't remember exact model but it's Corsair 550W
   

• Troubleshooting:
  

1. Changed GPU (from GTX 1060 to current)
   
2. Changed RAM
   
3. Turned D.O.C.P off
   
4. Turned D.O.C.P on
   
5. Updated all drivers (chipset, graphics, etc..)
   
6. Updated BIOS
   
7. memtestx86 (no errors)
   
8. CheckHealth
   
9. Updated windows
   
10. Installed fresh windows (wiped everything) and reinstalled all drivers.
    
11. Tried different RAM that I am sure is not faulty
    

• Notes:
  

1. I tried installing fresh windows multiple times and I noticed that every time I get insanely many BSODs before I install the chipset driver. Then it returns to normal frequency as stated in the 'problem' section.
   
2. Every time I check the performance monitor I see the message below or something similar: