Windows 10: Frequent BSODs cause my computer to reboot making my PC unreliable.

I am getting random reboots with a BSOD. Nothing in my computer has changed except the motherboard which I replaced for the exact same model and brand after I was having the same BSOD reboot issues with the previous motherboard. I thought perhaps I had a hardware error in the motherboard resulting from a CPU cooling fans that went bad which I replaced as well along with the casing fans. I am not overclocking the CPU and have run stress tests on my CPU without issues. No other hardware has changed. The Event Viewer shows many of the reboots as Critical and the message I see is:The computer

:)

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

Frequent BSODs of unknown reason. Possibly caused by new PC component


Hi.

I have recently upgraded my PC. The upgrade included:

• A 2GB DDR2 Kingmax RAM stick.
• A 250GB SATA II Hitachi hard drive, which is a replacement for my old broken hard drive.
• An NVIDIA GeForce 210.

I performed a clean install of Windows 7 after the hardware upgrade. After that, I upgraded to Windows 10. Since then, I have been encountering BSODs on a daily basis, even during normal computer use.

I think that the BSODs were caused by the new parts, and most likely caused by the new RAM stick, since I have not encountered this many BSODs before the hardware upgrade, when I was still using windows XP. Please help me find out the cause for the frequent BSODs.

I attached the debug file following the posting instructions. Thank you.

 

PC reboots (no BSOD) on CPU stress

Try OCCT with just one stick of ram if crash then try the 2nd stick by it self. Lets eliminate the ram from the scenario.

I would think its more likely to be the Ram cuz of OCCT or maybe the mobo but I doubt the tumble did anything to the CPU.