Windows 10: Download stuck while trying to factory reset

I decided to factory reset my pc while keeping my files pretty much reinstalling my os but for the past 2 hours it’s been stuck at 30% and i can’t even cancel it. i remember i chose to download the os online and it might be possible that my pc disconnected halfway my wifi is pretty bad so i was wondering if it is safe to unplug the pc or just wait longer

:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Stuck during factory reset.


So the Factory reset has been stuck at 2% for the last 8 hours.

 

factory reset

I suspect that option borked the installation, and so no other options can correct a corrupted system. Got data on it you want? Create a Linux distro boot USB (Mint is good), and boot into that to recover your data to an external storage source Download and create a Win 10 install boot USB and re-install. Make sure you delete EVERY partition, possible just before the copying of installation files starts. (Come back if you want step by step help)