Windows 10: Display Port Hot Plug detection

This has been a problem for the better part of the decade. What happens is when a monitor is connected using DP and goes to sleep, windows would shift open windows/icons to other non-DP monitors. Can we just get an option to disable hot plug detection?

:)

 

Laptop display does not detect itself

Hi,

In regards to your concern, since the second screen can't detect the display settings of your other laptop, we suggest that you perform the steps below and see if it helps:

• Go to Settings.
• Click on System.
• Under System, choose Display.
• Under Multiple displays, click on Duplicate these displays and apply.

Let us know the details so we could further help.

 

My Seagate external hard drive is not detected when plugged in to USB port of my laptop using windows 10?

Thanks for your response.

I have tried all the steps provided, however in vain. The external hard drive is not identified at all in any of the the USB ports when connected. The USB ports identify other external Flash drives and devices. However this drive is detected in another laptop
using Windows 7 OS. Please advise further.

Regards

 

My Seagate external hard drive is not detected when plugged in to USB port of my laptop using windows 10?

Hello Lingam,

As you are facing issues with accessing hard drive on your computer, we will help you with this issue.

Do let us know the following to assist you better:

• Have you made any changes to the operating system prior to this issue?
• What is the complete error message/ error code while trying to access the hard drive?
  

Step 1: As a workaround, I suggest you to do the following to detect the issue:

• Connect the hard drive to different port and check if the issue persists.
• Connect different hard drive to the same port and check.
• Connect different hard drives to different ports and check.

Step 2: If the device is not detected on your computer try to run
Hardware and Devices troubleshooter as it checks for common problems and makes sure that any new device or hardware connected to your PC is installed correctly.

• Press Windows key from the keyboard, type
  Troubleshooting and select it.
• Click on view all option on the upper left corner of
  Troubleshooting window.
• Select the Hardware and Device
  options from the list.
• Click Next to run the Hardware and Device
  Troubleshooter

Step 3: I suggest you to check if there are any drivers with yellow exclamatory mark in the Device Manager.

• Press Windows + X from the keyboard, click on
  Device Manager.
• Right click on the detected driver, click on Properties
  and check the device status.
  

Hope it helps. Try the above and update us the status of this issue with the required information, we will be happy to help you further.

Thank you.