Windows 10: BSOD after installing new cpu

So after instaling new cpu and m2 drive frequent BSOD startet appearing right after booting up the pc there were about 4 different ones most of the time it said MACHINE CHECK EXCEPTIONS but also the others that i have saved are CLOCK WATCHDOG. TIMEOUT, KERNEL SECURITY CHECH FAILURE and KERNEL AUTO BOOST LOCK ACQUISITION WITH RAISED IRQL After installing old cpu back everything worked fine So the thing that i already did are:I installed new system from microsoft page I updated bios Installed every possible new driver Except one that is called OLDER DEVICE in device menagerAnd i cant do anythin

:)

 

PC reboots (no BSOD) on CPU stress

Hi fellow TPU members,

not too long ago, the box my gf's PC was transported in gave way on the stairs. Yes, you got it right, that sent a PC tumbling down a flight of steps alright.

Stuff broke. Also, stuff remained intact somehow.

I bought her a new case, new CPU cooler and we removed the floppy drive, so far so good. But the PC started crashing for no apparent reason, without a BSOD.

I tested:

• Memtest86+, left overnight, 0 errors
• Scanned the HDD for errors, nothing there
• Left FurMark burning up the GFX card and drawing some power, no problems there
• Ran Ubuntu from a Live CD doing nothing special, didn't crash
• Ran OCCT, Linpack, Prime95, all 3 caused reboots within minutes
• Oh, and I disabled "Restart on error" so I'm sure it's not a BSOD.

Now, I can still try and test something CPU intensive on Ubuntu, but my guess is the CPU didn't survive.
Before I do anything drastic like whippin' out the magic wallet and get her a new AMD quad, is there anything I didn't see?
I'm guessing the motherboard could be borkered as well, but can I check that other than replacing the CPU with a working one?
Any suggestions on which proggies I can use from an Ubuntu Live CD to stress the CPU?

 

BSOD after install of new CPU

Hello,

I recently installed a new CPU, after doing so I was excited to play games with better performance.

Before buying the CPU I made sure I checked that everything should be compatible and it was, I bought it as a prebuilt and went on the “Upgrade your PC and picked it from the upgradable items list.

ASUS Global

After buying the CPU I installed it, everything looked and seemed to be working, until, I started to use the PC as I would, I simply only replaced the CPU, did not touch anything but the CPU.

Previous to installing a new CPU everything worked absolutely fine, just lacking performance.

I reset my PC with the new processor and that worked absolutely fine for hours resetting it, nothing went wrong.

Until I open something such as Browser, or something loads up, it’ll Blue screen with “MACHINE CHECK EXCEPTION”

Even with safe mode on it still blue screens

What Ive already done.

Reset my PC

Reinstalled Windows from local disk.

Updated Bios from 1108? to 2208

Took ram out and tried one stick,

Went on BIOS and set everything to default;

Ive currently got my old CPU in just to play while I think of a solution.

My specifications

PSU: 350W PSU

Processor [New/BSOD]: i7 9700K

Processor [OLD/Works] i3 9100F

RAM: x2 Corsair Vegegance 8gb [16GB]

Motherboard: ASUS PRIME H310 PLUS R2.0

Graphics Card: Geforce 1650 ZOTA

Storage 1TB HardDrive

Storage: 32gb USB Stick [To flash bios]

 

windows xp installation and dual core am

could someone please list the steps they follow to install windows with a dual core processor and windows xp service pack to. I'm reletively new to amd dual core and i feel i'm missing a step. All help will be appreciated. thanx