Windows 10: brusbsib.sys incompatible driver preventing memory integrity from functioning

So I have read multiple resources on brusbsib.sys and cannot find an accurate solution to solve the problem. I have tried to remove the driver manually by using pnputil command in PowerShell and I end up with many errors upon reboot: sound isn't configured, event manager will not run, system restore program will not run, and other vital errors. I had to boot into repair mode and restore my computer settings to make it usable and semi-secure again. I have tried updating brusbsib.sys as well and that function does not seem to work either because upon reboot it still shows as incompatible. I am a

:)

 

Windows 10 - Memory Integrity - Incompatible Drivers

Good day all,

Please could someone advise how I might identify and safely remove/disable/update the following incompatible drivers, so that memory integrity can be re-enabled.

The incompatible drivers are as follows;
- ftdibus.sys
- wdcsam64_prewin8.sys
- PxHIpa64.sys
- SaiH0C2D.sys
- tib.sys

Autoruns lists nearly all of these files however I have not used this utility before, so thought it's best I ask first.

Any and all suggestions are very much appreciated!

Windows Ver.: Windows 10 20H2 Build 19042.870

Many thanks,
Koray

- - - Updated - - -

Bump!

 

Memory Integrity Can't Be turned On Due To Incompatible Driver - WinVDEdrv6.sys

I've been trying to activate Core Isolation on my laptop but the driver "WinVDEdrv6.sys" is preventing me from doing so.

I receive the following message that "Memory Integrity Can't Be turned On Due To Incompatible Driver - WinVDEdrv6.sys"

I found the file "WinVDEdrv6.sys" in Windows>SysWOW64 folder.

There was also another file "WinVDEdrv.sys" in the same folder.

Any ideas how the memory integrity could be turned on?

Thank you for your support!

 

Incompatible drivers prevent switching on Memory Integrity

I have a similar problem of Memory Integrity is switched off and cannot be switched on due to incompatible Logitech drivers. I am using a Logitech C270 webcam. The incompatible drivers that Windows 11 lists are:

lvbglt64.sys

lvrs64.sys

lvuvc64.sys

I contacted Logitech to try to update the Logitech webcam drivers. Their tech support staff instructed me to:

1. Open Device Manager

2. Expand 'Imaging Devices'

3. Locate the name of your Logitech camera in the list and right-click on it.

4. Select 'Update Driver Software'

5. Click 'Browse my computer for driver software'

6. Click 'Let me pick from a list of device drivers on my computer'

7. Check 'Show compatible hardware' and then select 'USB Video Device'

8. Click 'Next' and follow the on-screen instructions to update the driver.

I followed their advice and restarted my Windows 11 computer. However, I still have the same incompatible drivers issues and so still cannot switch on Windows 11's Memory Integrity.

Furthermore, the Logitech webcam now does not show up in the Device Manager | Imaging Devices list. I tried plugging in my C270 webcam USB plug into different ports of my Windows 11 computer but the Logitech webcam still does not show up in the Imaging Devices list.

Unfortunately, Logitech's support home page keeps not being able to resolve so I am unable to re-contact Logitech.

If anyone can advise on how to fix the Memory Integrity is switched off and cannot be switched on due to incompatible Logitech drivers, I'd greatly appreciate it. Unfortunately, I'm not technical.

Or should I just not bother since my Logitech C270 webcam works fine and I have Norton 360 Premium on my Windows 11 computer, i.e. I'm likely to be largely safe from attacks by malicious external devices?