Windows 10: "Boomy" bass sound in laptop speakers

Hey, So basically I am facing an irritating problem, that is my speaker sound too BOOMY and with lot of BASS, when I am using 'Realtek High Definition Audio' Driver. 1 I changed the driver to High Definition Audio, which basically fixed the BOOMY Bass Sound, but then the volume was too low and audio was 'PLAIN' [which didn't sounded too good at all]2 I updated the Realtek driver from manufacturers site but no success..... 3 Disabled and Uninstalled the driver and restarted the PC, but still nothing......4 Next I used VoiceMeeter to reduce Bass and Med. It seems to remove the boomy sound bu

:)

 

bass not working on Windows 10 with speakers

Try these. My friend had a similar problem, I followed the steps in the first link and fixed it. Before you try these; have you updated your OS? It may be a driver problem.

1. Troubleshooting Sound Problems with External Speakers
   
2. my external speakers aren't working
   
3. no bass through beats audio
   

 

Using aexternal Speakers with Sub on a Laptop.

If it's attached by a standard stereo jack then the only control over the Bass and regular frequencies will be via a "crossover" in the speaker itself , this will send bass frequencies to the Sub, and others to the regular speakers

If your laptop has a full range output, this will be via multiple jacks. USB, or specialist socket(s), and the software to control what frequencies are fed to which output this will be in the laptop. The control will be at a set starting point and may have a variable control

I've just looked at the spec on your laptop and as there is not any specific specs of the sound output this would suggest that the sound output is a standard one rather than an advanced set up

 

No bass in surround

Okay I will mark this as solved as I have fixed my issue. Here is what I did:

• After trying all the common suggestions about drivers and such, I had no luck
• On a whim, I bought a sound card and hooked it up via the optical cable.
• I also changed the speaker settings on my receiver from Large to Small.
• I removed all sound drivers other than those for my sound card (Soundblaster ZX)

I now have bass in surorund sound. I also have it set to 5.1 in Windows and have checked all speakers with a surround sound audio file I downloaded.

My guess is that the driver coming off of the Nvidia card is only in 2.1 and it just can't decode/send the right sounds to the receiver over HDMI.

At any rate, hopefully this will help someone else.