Windows 10: Bitlocker error because of bcd settings change

Hello, I'm using windows 11. I toggled bitlocker, test mode and secure boot to install a certain driver. I managed to get the driver working and turned bitlocker back on but the next time I turned on the pc I saw the "BCD setting 0x16000049 has changed for the following boot application: \WINDOWS\system32\winload.efi" error. I tried toggling test mode and secure boot but no combination fixed the issue. The code in my microsoft account is wrong. I printed the key in documents but didnt get the chance to move it elsewhere I only have one drive. I've also tried all the default troubleshooting o

:)

 

Bitlocker BCD must be verified

Is this caused by Guarded host cause all my entries in BCD are correct, Bitlocker gives error that it cannot find drive on windows 11 cause BCD settings are incorrect, but they are correct i even enumurated all

 

Settings for Boot Configuration Data (BCD) to install Bitlocker on Win 10

Situation: Win 10 Pro on an EVO 850 SSD drive. OS was cloned to SSD (which is new) from orig HD in the machine. TPM exists on machine, and is active. Used Samsun Magician to allow encryption (not exact wording) before cloning occurred. Wish to install Bitlocker on both drives. Tried to install on C: and got this error:

Installation on D: (a pure data drive) seems to have worked.

1. What is the correct path for this?
   
2. What are the correct BCD settings?
   
3. Is this going to require re-doing the partitions / re-installing Windows?
   
4. [edit] Might this be as simple as needing to do a BIOS pwd and turn on Secure Boot in the BIOS (which I turned off in the process of making the SSD the boot disk)? See question here.
   

I suspect that the partitions are not correct to permit this (which the BCD reference suggests), but cannot seem to verify. Partition setup, as created by Samsung cloning s/w, is:

1. Recovery
   
2. System (EFI System)
   
3. Reserved (MSR)
   
4. Primary (OS)
   

Recovery is active (i.e. reagentc was told to enable, and it's usable).

 

Windows defender offline error: EFI\Microsoft\Boot\BCD - 0xc0000185

Hi Dave,

Could you provide us additional information to assist you better with this issue:

• What is the make and model of your device?
• Have you made any changes to the operating system prior to this issue?
• Are you able to boot the device to desktop with this error message?

This issue might have occurred due to corruption in the boot files or BOIS unable to detect your drive to boot.

I suggest you to refer to the below thread, check if your issue matches with the same.

If so, try the troubleshooting steps suggested by -.[Final]#[Boss].- and check if
it helps.

Error code after update File:\EFI\Microsoft\Boot BCD
Error Code 0xc0000185 BSOD

Hope this information is helpful.