Windows 10: Battery Health

is battery life extended if the PC is shut down and unplugged every night ?

:)

 

Battery Health

I've been analyzing battery health level and quite concerned about losing battery health. Could anybody tell me if my battery health deterioration will level out or continue to lose health. Is this normal? Thanks

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Health & Performance Report Not Available on 2 user accounts except the administrator's account in the laptop has Health Report

We appreciate your time responding back to us. At this point, we would suggest that you access the built-in Administrator account to and check if you would be able to perform a Health Check from it. Here are the steps on how to enable the built-in Administrator
Account:

• Right-click on the Start button.
• Select Command Prompt (Admin).
• Type the net user administrator /active:yes and hit
  Enter.

After completing these steps, you should see a message that you've done the command completed successfully. Sign out from your current user profile and you'll see the Administrator account as one of the choices.

Let us know if you would be able to perform a system health check on your account and we'll assist you with the next steps needed.

Once you're successful with performing a health check on the Administrator account, we would suggest that you disable it from your personal user profile by following these steps:

• Right-click on the Start button.
• Select Command Prompt (Admin).
• Type the net user administrator /active:no and hit Enter.

Let us know how it goes and we'll assist you further.