Windows 10: Annoying message to enter BIOS settings and RAID controller also don't know for sure

This message pops up every time when PC starts working, not when reloading. So, when PC starts, then this message appears and I enter BIOS setup and exit without any changes. After that system works fine , Windows starts as it should do and everything works perfectly. Only this message really irritates.What was done- Raid mode on/off - nothing changed- Using BIOS default configs - nothing- Replace connectors of keyboard, mouse and so on - nothing I wonder why 2 keyboards connected

:)

 

entering Bios settings

Hi Geoff,

To access BIOS settings under Windows 10 operating system, please follow the steps below:

• Click Start, then click Settings.
• Click Update & security, select Recovery then under
  Advanced startup, click Restart now.
• Select Troubleshoot, then Advanced options, then click
  UEFI Firmware Settings.

Let us know how it goes.

 

raid 80g or 160g

I'm actually not sure what you just said, so I'll just list the steps.

1: Install the drives
2: Go in to your BIOS (or whatever is controlling the RAID)
3: Set them up as RAID
4: Install windows
5: Press F6 when Windows says "Press F6 if you need to install additional RAID or SCSI controllers."
6: Insert the floppy and load the drivers
7: Continue with the install like normal

 

help raid 0

so what is the step by step to set up raid 0?
First, format both ssd to the same format: NTFS
Second, change sata mode in bios from ahci to Raid
Third, save bios and reboot, press Ctril+ I to enter Raid setup
Fourth, make a raid disk

is it right?