Windows 10: How to remove internal NVMe M.2 SSD from list of removable media and as a device

Howdy folks. Had multiple internal drives for some time with Win 10. Just did a fresh install with Win 11 and only one drive is showing as removable and in the list of Devices. All drives are up to date on firmware. Per an online search I found the bus number for the drive in Device Manager and added a TreatAsInternalPort line in the registry for ahci also tried NVMe but adjusting to stornvme per this commandreg.exe add “HKLM\SYSTEM\CurrentControlSet\Services\storahci\Parameters\Device” /f /v TreatAsInternalPort /t REG_MULTI_SZ /d Xreplacing X at the end with bus numberbut no luck. The bus

:)

 

M.2 SSD Drive With Windows 10 Listed as Disk 1 in Disk Management,

Hi, In my pc M.2 SSD with Windows 10 OS is listed as Disk 1 and not as Disk 0 in Disk Management. Also, the same drive is listed as Removable devices which is actually internal SSD.

Can anybody help me resolve this, please?

 

My m.2 ssd is recognized in bios, but not as a boot device

Thank you very much for reaching out! As an Independent Advisor and fellow Microsoft user, I'm more than happy to assist you.

Here are some steps you can take to troubleshoot and potentially resolve this issue:

1. Check BIOS Settings

Ensure that your BIOS settings are correctly configured to recognize the M.2 SSD as a boot device:

• Enable CSM (Compatibility Support Module): Sometimes, enabling CSM can help the BIOS recognize the SSD as a boot device. You can find this option under the Boot tab in the BIOS settings.
  
• Set Boot Priority: Make sure the M.2 SSD is set as the first boot device in the boot priority list.
  

2. Update BIOS

Updating your motherboard's BIOS to the latest version can resolve compatibility issues with new hardware:

• Visit the ASUS official website to download the latest BIOS update for your ROG Strix B650 Wi-Fi motherboard.
  

3. Reinstall the SSD

Ensure that the M.2 SSD is properly installed:

• Remove the SSD and reinsert it firmly into the M.2 slot. Make sure it is securely fastened with the screw.
  

4. Initialize the SSD

If the SSD is new, it might need to be initialized:

• Boot into Windows using another drive, open Disk Management, and initialize the SSD as either MBR or GPT.
  

5. Check for Drive Mode Compatibility

Ensure that the M.2 slot you are using supports the type of SSD you have (SATA vs. NVMe):

• Some M.2 slots only support either SATA or NVMe, not both. Refer to your motherboard manual to confirm compatibility.
  

6. Repair Boot Configuration

If the SSD has Windows installed but is not recognized as a boot device, you might need to repair the boot configuration:

• Boot from a Windows installation USB, go to the command prompt, and use the following commands:
  
  
  This can help rebuild the boot configuration data.
  

7. Check for Hardware Issues

If none of the above steps work, there might be a hardware issue with the SSD or the motherboard:

• Test the SSD in another system to see if it is recognized as a boot device.
  
• If the SSD works in another system, the issue might be with the motherboard. Consider contacting ASUS support for further assistance.
  

Please feel free to reach out if you require any additional assistance. I'm here to help!

 

Hiding devices from Safely Remove Hardware and Eject Media list

In my Safely Remove Hardware and Eject Media list both my internal SSD and storage drive are listed. I want to be able to hide/remove these drives from the list. After a lot of searching all I could find was a registry trick for Win7 which no longer applies
in Win10. All the other suggestions have been to shut off hot swapping but that is something I use. This is a work machine that I am often connecting and disconnecting drives from. It seems like it should be a simple thing to mark certain devices to not be
listed. What can I do?