Windows 10: Secure_Kernel_Error BSOD, Now showing ndis.sys as failure module

I have a relatively fresh install of Windows 11 on new hardware, self assembled. It has been intermittently failing with a Blue Screen of Death and the message saying SECURE_KERNEL_ERROR. The timing does not seem regular, but it often happens when connected to my work's VPN.I have tried :updating windowssfc scan showed no issuesMemory scan showed no issuesNo drivers showing update availableI ran Verifier in the cmd terminal and asked for all drivers to be monitored. The BSOD is still happening intermittently but the error has changed. Now it shows ndis.sys as the problem source.Managed to open

:)

 

BSOD while using the internet. error (L1C63x64.sys)


Hi trainman81,

Welcome to the 10forums.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


AVG is trying to request data from the internet, which is why the network driver is marked as the cause.
Code:

Code:

*** WARNING: Unable to verify timestamp for L1C63x64.sys *** ERROR: Module load completed but symbols could not be loaded for L1C63x64.sys 0: kd> lmvm L1C63x64 start             end                 module name fffff801`89700000 fffff801`89722000   L1C63x64 T (no symbols)                Loaded symbol image file: L1C63x64.sys     Image path: \SystemRoot\System32\drivers\L1C63x64.sys     Image name: L1C63x64.sys     Timestamp:        Mon Apr 01 05:15:17 2013 (5158FBC5)     CheckSum:         000245C4     ImageSize:        00022000     Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

AVG drivers that have been flagged
Code:

Code:

*** WARNING: Unable to verify timestamp for avgwfpa.sys *** ERROR: Module load completed but symbols could not be loaded for avgwfpa.sys *** WARNING: Unable to verify timestamp for avgfwd6a.sys *** ERROR: Module load completed but symbols could not be loaded for avgfwd6a.sys

Please uninstall AVG and see if it helps
Uninstall AVG | AVG
It is further recommended to check your Qualcomm network driver for updates, its driver is not supported for Windows 10.
Driver Reference Table - L1C63x64.sys

 

QCAMAIN1.SYS CAUSING BSOD

This was probably caused by the following module:
qcamain1.sys (Qcamain10x64+0x108678)

Bugcheck code: 0x1D3 (0x333, 0x0, 0x0, 0x0)

Error: CUSTOM_ERROR

A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: qcamain1.sys .

Google query: qcamain1.sys CUSTOM_ERROR

Using WhoCrashed I found this thread: Redirecting however without
solution, locked.

I did get BSOD almost everytime I moved the laptop.

This worked for me:

unscrew wifi module, push a little into the socket. Screw in. DONE

 

SECURE_KERNEL_ERROR after installing VirtualBox

I had installed VirtualBox and was running Ubuntu on it. As soon as I closed the virtual machine, I was hit with the BSOD with stop code: SECURE_KERNEL_ERROR.

I was tweaking the RAM and core usage on it for a few hours. In the end when I had assigned it 4 cores (out of 12) and 3.5 gb of ram (out of 8gb), in the Task Manager it was showing around 40% CPU usage (which was occasionally spiking to 100%) and 97% RAM usage. I had also enabled 3d acceleration and installed guest additions. Before finally closing the VM, I had installed gnome software.

The BSOD is showing now for about an hour with 0% complete. What should I do?