Windows 10: I have an HP laptop windows 11. Can turn on but cannot get past opening page to all my...

Can turn on windows 11 laptop HP. Cannot get spacebar to go to ID password unlock.

:)

 

Secure boot isn't turning on in HP laptop (windows 11)

Hello Mohd_357,

Welcome to Microsoft Community.



I understand the frustration you’re facing with Secure Boot on your HP laptop. Let’s troubleshoot this issue step by step:

1. Load HP Factory Default Keys:
   
   • Go into the BIOS settings.
     
   • Navigate to System Configuration > Boot Options.
     
   • Look for an option to Load HP Factory Default Keys. If available, select it.
     
   • Check if Secure Boot becomes available after doing this.
     
2. Disable Fast Startup:
   
   • Boot into your operating system (Windows 11).
     
   • Open Settings.
     
   • Go to Updates & Security > Recovery.
     
   • Click Restart Now under “Advanced startup.”
     
   • Wait for your PC to boot into the system recovery menu.
     
   • Select Troubleshoot and then choose Advanced options.
     
   • Finally, select UEFI Firmware Settings.
     
3. Check BIOS Mode:
   
   • Ensure that your Windows 11 installation is in UEFI mode, not legacy mode.
     
   • If your notebook’s BIOS mode is set to legacy, you won’t be able to enable Secure Boot. You may need to reinstall Windows 11 from an EFI boot source.
     
4. Reset BIOS settings to Default:
   
   • Reset BIOS settings may restore secure boot settings to normal factory state.
     

Regarding TPM 2.0:

• Your PC may not have TPM (Trusted Platform Module) support, which is required for Windows 11.
  
• Additionally, Windows 11 requires an Intel 8th gen core processor or newer.
  

I hope it can solve your problem.

Thank you for your patience and cooperation.



Best Regards,

 

My hp laptop wont turn on

This is a frequent problem am sure as you have already seen from online searches.

Flea power is usually the culprit here, basically its residual power that remains on the computer even after thecomputer has been shutdown. You can drain the flea power with the steps the other answers have suggested.

• Disconnecting the battery and adapter
• Press the hardpress the power button for 30 seconds
• This should clear the flea power

If this doesnt work, read this article its about
a dell inspiron but the same applies for you hp. It has some detailed step by step instructions

 

HP Laptop Boot Loop

I am encountering a boot loop problem with my HP laptop. Upon startup, it shows the HP logo and loading dots for about 11 seconds, then goes to a blank screen for approximately a minute before automatically restarting. The power button does not turn off during this cycle.

Troubleshooting Steps Taken:

• Tried hard reset and accessing BIOS/UEFI settings.
  
• Unable to boot into Safe Mode or recovery environment.
  

please see here the recorded video demonstrating the boot loop behavior for reference.

Any advice, troubleshooting steps, or insights into what might be causing this problem would be greatly appreciated.

Thank you in advance for your help and suggestions.