Windows 10: no audio devcie is installed error in my asus X 512 FA windows 11 pc after updating audio...

Hi..im experiencing no audio device is installed error in my asus X 512 FA windows 11 pc after updating audio driver using a third party free updater.even after updating the drivers from asus X 512 FA support page the situation is the same.i guess the audio is controilled by raeltek

:)

 

Windows 10 Audio Service Can't Be Started

Suddenly my audio icon on the taskbar is marked with a red circle with an x in it and no audio plays. If I click on it, the troubleshooter starts and fails unable to fix the problem. Here is what I have tried so far:

• Opened the Services program and tried manually starting Windows Audio - I receive an Error 126: The specified module could not be found
• Restarted the Windows Audio Endpoint Builder and then tried to start Windows Audio again and received the same error
• Went into Device Manager and tried to update the audio drivers for HD Audio. No difference
• Booted in Safe Mode and the same issues persist.

This is a custom built PC that has seen no issues with audio for the past 6 years. The only hardware changes have been a couple graphics card upgrades and the last was probably ~6 months ago. No driver updates have been installed recently that would account
for the sudden change in status of my audio hardware.

Relevant Hardware:

• ASRock X58 Extreme3 Motherboard
• Intel i7-930
• ASUS Radeon RX470

Any suggestions on how to solve this problem would be greatly appreciated.

 

Windows Audio Crashes

My audio stops working when ever a mic is turned on.

On login, audio output works normally, however, when ever any mic is used, both audio input and output crash and a red x shows up on the taskbar audio icon.

It seems the Windows Audio service is what crashes.

After the first crash, the audio does not come back no matter what I do until I restart my pc.

I can replicate this with the following steps:

1. Login to pc
   • audio output working fine
2. Open sound settings, opens to playback tab
   • audio still fine and also able to play test sounds
3. Click on Recording Tab
   • The sound feedback indicator on the right side is missing
   • The window freezes, error window appears about DLL crash
   • If there is no connected or enabled recording device, nothing happens everything else seem to run normally
4. Proceed to follow various trouble shooting steps
   • Some troubleshooting steps seems to get rid of the red x on the taskbar volume icon
   • The recording tab in the sound settings is also now accessible
   • However things may seem fine at first, audio input/output is still not working and playing a test sound fails.

Solutions I've Tried:

• DISM (ended with no errors)
• sfc /scannow (found corrupted files, required restart)
• Restarting Windows Audio Service (results in err 1061, service then gets stuck on stopping)
• Disabling and re-enabling audio drivers
• Reinstalling audio drivers from manufacturers site
• Using windows generic audio drivers
• Restarting my PC

As you can see, I've spent a lot of time trying to fix this issue and it is starting to get really frustrating.

 

DTS audio process settings are unavailable with currently active audio device

Hello bagir shahab,

Thanks for using Microsoft products and posting in the community.

The error message you're encountering suggests that the DTS audio processing settings are not available for your currently active audio device. This could be due to several reasons, such as a driver issue or a conflict with another audio software or device.

Here are a few steps you can try to troubleshoot and resolve the issue:

1. Restart your computer: Sometimes, a simple restart can resolve temporary software glitches.
   
2. Check DTS APO Service: Since you mentioned that the DtsApo4Service is running, it's worth verifying if it's functioning correctly. You can try restarting the service by following these steps:
   
   • Press Windows Key + R to open the Run dialog box.
     
   • Type "services.msc" and hit Enter to open the Services window.
     
   • Locate the "DTS APO Service" in the list of services.
     
   • Right-click on it and select "Restart."
     
   • Close the Services window and check if DTS audio is now functioning.
     
3. Update audio drivers: Ensure that you have the latest audio drivers installed for your Asus Vivobook. You can visit the Asus support website, enter your laptop model, and download the latest audio drivers compatible with Windows 11.
   
4. Uninstall and reinstall DTS software: Completely uninstall the DTS software from your computer and then reinstall it. To uninstall:
   
   • Press Windows Key + R to open the Run dialog box.
     
   • Type "appwiz.cpl" and hit Enter to open the Programs and Features window.
     
   • Locate the DTS software in the list of installed programs.
     
   • Right-click on it and select "Uninstall."
     
   • Follow the prompts to complete the uninstallation process.
     
   After uninstalling, visit the official DTS website or your laptop manufacturer's website to download the latest version of the DTS software. Install it and check if the issue is resolved.
   
5. Disable other audio-enhancing software: If you have any other audio-enhancing software installed, such as Dolby Atmos or Waves MaxxAudio, temporarily disable or uninstall them. Sometimes, conflicts between different audio software can cause issues.
   
6. Check default audio playback device: Ensure that your desired audio device (laptop speakers or headset) is set as the default audio playback device. To do this:
   
   • Right-click on the volume icon in the system tray and select "Open Sound settings."
     
   • Under the "Output" section, select your desired audio device from the list of available devices.
     
   • Click on it and click the "Set as default" button.
     

If none of the above steps resolve the issue, you may want to reach out to the DTS support team or your laptop manufacturer's support for further assistance. They may have specific troubleshooting steps or updated drivers for your device.

Please feel free to let me know if you have any further updates, thanks.

Best Regards,

Lenka-MSFT| Microsoft Community Support Specialist