Windows 10: Win 11, 285K, mscorsvw.exe BSODs

Due to Intel's disastrous 13th and 14th gen failing CPUs, I had to rebuild my system with a brand new 285K. However, I have been battling with BSODs since I have replaced the Mobo and CPU. I have already completely replaced the RAM and tried a bunch of different BIOS settings. I have tried clean installs of Win 11 23h2 and 24h2 Pro for Workstations. I have the most up to date drivers, firmware and drivers for all hardware. The bluescreen always has the same caused by address in BlueScreenView and is usually a IRQL_NOT_LESS_OR_EQUAL BSOD caused by mscorsvw. Any help would be appreciated. BlueSc

:)

 

Unexpected kernel mode trap BSOD Windows 11

Hi Rachman,

I hope you're doing well. I wanted to suggest a few steps to help you troubleshoot and resolve the issues you're experiencing with your PC.

1. Check Your RAM:
   
   • Open the Run dialog by pressing Win + R.
     
   • Type MRT.exe and press Enter.
     
   • Follow the on-screen instructions to perform a thorough scan of your system's RAM.
     
2. Update All Drivers:
   
   • Keeping your drivers up to date is crucial for system stability and performance.
     
   • I recommend using IOBit's Driver Booster (free version) to simplify the process:
     
     • Download and install IOBit's Driver Booster.
       
     • Run the program and follow the prompts to scan your system for outdated drivers.
       
     • Update all the drivers it identifies as needing updates.
       

When you encounter a BSOD, it's essential to take note of the specific error message displayed on your screen. This message is usually located to the left side of the QR code on the BSOD screen. Providing the exact error code will help in diagnosing the root cause of the issue more effectively.

Please follow these steps and let me know if you need any further assistance. By checking your RAM and updating your drivers, we can hopefully resolve the BSOD errors and improve your system's performance.

Best regards,

 

Win 10 BSOD while using

Did upgrade to Win 10 over a month ago. This morning my Lenovo T410 laptop had the BSOD with Error=0xc000000f on it (it does backups overnight). I've run diags on the hardware (mem, motherboard bus, PCI bus and HDD) all PASS. Tried using my repair disk
(built in Jan with Win7) and was unable to recover. I checked for bad sectors and found none. From CMD prompt I did DISKPART and LIST VOLUME and all volumes say HEALTHY but I see that my C: drive (primary partition) says it is RAW (instead of NTFS). My backup
media is a network attached (NAS) disk and I used Cobian 11 Backup. Not sure what my next step would be. Looking for suggestions before I have to restore to Win7 and re-upgrade, etc.

 

IE 11 Win 10 Sites slow to load ex: nbc & food network

Hi,


Thank you for posting your query in Microsoft Community.



I understand your concern and will assist you to resolve this issue.

• 
  Are you facing this issue particularly with specific web site or all the web sites?
  

I suggest you follow the methods below and check if it helps.

Windows 10 has a built-in troubleshooter to check and fix issues with Internet Explorer. I would suggest you to run this troubleshooter to check if the issue is with your Explorer.

Refer these steps:

• 
  Press Windows key +X, select Control panel.
  
• 
  Change the view by option on the top right to Large icons.
  
• 
  Click on troubleshooting and click on the view all option on the left panel.
  
• 
  Run the Internet Explorer performance troubleshooter.
  

And also refer the link below and check if it helps.

Internet Explorer help - Microsoft Support



Fix site display problems with Compatibility View.

Fix site display issues with Compatibility View in Internet Explorer 11 - Microsoft Support



Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help.