Windows 10: Why does my Ethernet configurations show a small amount of properties? And why are the...

Hello. Today I was trying to optimize my Ethernet settings for gaming. Every tutorial shows this optimization by changing the Ethernet Properties. Control Panel - Network and Sharing Center - Ethernet - Properties - Configure - Advanced. The tutorials show many properties in which can be changed about 20-30 or so, while I only have 7. Flow Control, Interrupt Moderation, Network Address, Priority & VLAN, Receive Buffers, Speed & Duplex, Transmit Buffers. This makes so I can barely optimize the settings. Something that also caught my attention is how the creators of the tutorials can

:)

 

IP configuration not valid - interference from ethernet adapter?

Solution 1: No Internet Access In Windows 8.1or Windows 10

Step 1:

Go to Device Manager → Network adapters.
Step 2:

Expand it (Network adapters).


Step 3:

Select your network adapter


Step 4:

Right click on your wireless network adapter or Ethernet adapter and then tap “Update Driver Software”.
(in this case your network adopter is Ethernet adopter so tap your Ethernet adapter)
Step 5:

Now on a new window you will need to click on “Browse my computer for driver software”.




Step 6:

Then select “Let me pick from a list of device drivers on my computer”.



Step 7:

Now choose the “Manufacturer’s drivers” from the list of two and then click next.



Step 8:

After the completion of the process just restart your PC and check if the problem is solved or not. If not, goto solution 2.



Solution 2: No Internet Access In Windows 8.1,windows10

Step 1:

Open command prompt.
Step 2:

Just go on hitting the enter after typing the each command.
netsh int tcp set heuristics disabled
netsh int tcp set global autotuninglevel=disable
netsh int tcp set global rss=enabled
Step 3:

Now to check if the settings are disabled type:
netsh int tcp show global
then hit enter.
Step 4:

Now the thing left is just rebooting your system and just check if the problem is solved or not and just give feedback.*chuckle*Thumbs

 

ethernet properties

Hi,

Based on the details provided, it is possible that your network adapter was blocking you to access the ethernet
properties. We recommend that you uninstall your network adapter and scan for hardware changes. To do this, follow these steps:

Uninstall network adapter:

• 
  In the search bar, type
  Device Manager
  and hit
  Enter.
  
• 
  Select the name of your network adapter and right-click.
  
• 
  Choose
  Uninstall.
  
• 
  Select
  "Delete the driver software for this device".
  
• 
  Click on
  Uninstall.
  

Scan for hardware changes:

• 
  In the search bar, type
  Device Manager
  and hit
  Enter.
  
• 
  Choose
  Action.
  
• 
  Select
  "Scan for hardware changes".
  

Let us know how it goes.

Regards.

 

Cannot connect to ethernet no valid ip configuration

We appreciate the information you've provided. We'd like to confirm the results after following the steps on the link provided on our previous post.

Meanwhile, to isolate your concern, we suggest that you check the following:

• 
  If the Ethernet port is clean.
  
• 
  If the end of RJ45 (Ethernet cord) is still intact.
  
• 
  If available, test the RJ45 (Ethernet cord) to your other device and check if issue persists.
  

We look forward to your reply so we can assist you further.