Windows 10: The evidence is all over the pages, the USB drivers are turning devices off far too...

I have updated the BIOS on the motherboard, I have updated the drivers, I have turned OFF all the power management for all USB devices and STILL the drivers are turning the devices off and on at random and I am getting sick and tired of hearing the USB device disconnected, USB device connected tones played back to back.AMD USB 2.0 eXtensible Host Controller - 1.20 Microsoft PCI\VEN_1022&DEV_15B8&SUBSYS_88771043&REV_00\4&89701DF&0&0043AMD USB 3.10 eXtensible Host Controller - 1.20 Microsoft PCI\VEN_1022&DEV_15B7&SUBSYS_88771043&REV_00\4&1EBE6A9C&0

:)

 

USB composite device "driver error"

Can you send us a screenshot of the error message? We suggest uninstalling and re-installing USB drivers and check if the issue persists. To do that, please follow these steps:

• Right-click on the Start button and select Device Manager.
  
• Expand Universal Serial Bus controllers.
• Right-click on the first USB controller under Universal Serial Bus controllers, and then click on
  Uninstall to remove it.
• Repeat these steps for the entire USB controller under Universal Serial Bus controllers.
• Restart the computer. Windows will automatically scan for hardware changes and reinstall all the USB controllers that you uninstalled.

Regards.

 

unknown device USB

Hi Ali,

In most cases, this issue can be caused by either an unstable/ corrupt USB controller or your computer's drivers need to be updated.

For us to isolate the possibilities, we suggest that you perform the following troubleshooting steps in succeeding order:

• Connect your USB drive to a different port. Alternatively, try to connect it to a different PC.
• Connect a different USB drive to your PC.
• Unplug your USB drive and restart your system. Afterwards, plug it in and see if it works. If the same issue occurs, perform a complete shutdown and wait for a few minutes before turning it on again.
  
• Update your drivers.

If you find that the USB drive still doesn't work even after performing all these suggestions, this is most likely pointing to a hardware issue. Thus, it would be best to get in touch with your device manufacturer for a thorough check of the device.

If you have any other questions or concerns, feel free to post back and let us know.

 

USB wireless mouse 'USB device not recognised'

Hi,

There are a lot of possible reason why this issue has occurred. We have some
questions for your to isolate this matter:

• 
  Have you tried using the USB mouse to other computer?
  
• 
  Is this happening with other devices?
  
• 
  What other troubleshooting steps have you done so far?
  

We suggest that you perform these methods of troubleshooting steps and check if there's any changes:

Method 1: Run the
Hardware and Devices Troubleshooter.

To run the
Troubleshooter,
follow these steps:

• 
  On the search bar, type
  Troubleshooting
  and hit
  Enter.
  
• 
  Choose
  Hardware and Sound.
  
• 
  Click on
  Hardware and Devices
  to run the troubleshooter
  

Method 2: Update your drivers.

To know how to update your drivers, click
here.

Method 3:
Run SFC Scan.  

To run an
SFC scan, follow these steps:  

• 
  Run
  Command Prompt as Administrator.  
  
• 
  Type
  sfc /scannow
  and hit
  Enter.   
  

Method 4:
Run DISM Tool.  

To run
DISM Tool, follow these steps:

• 
  Run
  Command Prompt as Administrator.  
  
• 
  Type the following command:  
  
  • 
    DISM.exe /Online /Cleanup-image /scanhealth  
    
  • 
    DISM.exe /Online /Cleanup-image /Restorehealth  
    

NOTE:
This might take a while to finish scanning.
Do not cancel. 

Method 5: Clean Boot.

To perform a
Clean Boot, click
here.

Note:
Reset the computer back to
Normal Mode
once you are done with the troubleshooting by following the section
"How to reset the computer to start normally after clean boot troubleshooting"
from the same article.

If the issue persists, it is possible that the
device itself has issues. We suggest that you
contact the store
from where you
bought the device.

Let us know how it goes.

Regards