Windows 10: upgrade ssd on laptop inaccessible boot device

HP Spectre X360 15t eb0053dx Upgrade ssd: Crucial P3 Plus 4TB - CT4000P3PSSD8After I swap the ssd for the new the one I now get INACCESSIBLE BOOT DEVICE. I have a thumb drive with windows 11 on it but I think its going to erase everything. But if I do, can I re clone all my data from my old ssd

:)

 

Unable to boot new SSD "Inaccessible Boot Device" error with win10 in it.

Hi

Welcome to Microsoft community.

I know the trouble you're experiencing with your new SSD and the "Inaccessible Boot Device" error on your Acer Predator Helios Neo 16 laptop running Windows 11. It seems that you encountered difficulties installing Windows 10 on the SSD, and now you're unable to boot from it.

Here are a few suggestions to help you troubleshoot the issue:

1. Check BIOS settings: Ensure that your laptop's BIOS settings are configured correctly to recognize the new SSD as a bootable device. Access the BIOS settings by restarting your laptop and pressing the appropriate key (usually Del, F2, or F12) during the startup process. Look for the Boot or Boot Priority section and make sure the SSD is listed as a boot option. If it's not listed, you may need to enable legacy boot or change other relevant settings. Consult your laptop's manual or the manufacturer's support website for specific instructions.
   
2. Verify SSD connection: Double-check that the SSD is properly connected to your laptop. Ensure the SATA or M.2 connection is secure and that the SSD is correctly seated in its slot. If necessary, remove and reinsert the SSD to ensure a proper connection.
   
3. Update SSD firmware: Visit the Crucial website and check if there are any firmware updates available for your Crucial P3 SSD. Sometimes, firmware updates can improve compatibility and resolve issues with certain systems. Follow the instructions provided by Crucial to update the SSD firmware.
   
4. Perform a clean Windows installation: If the above steps don't resolve the issue, consider performing a clean installation of Windows 10 on the SSD. Start by creating a bootable USB drive with a fresh copy of Windows 10. During the installation process, delete all existing partitions on the SSD and create a new one for the Windows installation. This will ensure a clean installation without any potential conflicts or compatibility issues.
   
   Disclaimer: At this point, we have exhausted all troubleshooting and I recommend that we try to perform a clean install to get your computer back into a working condition. Please ensure that you backup any important data, including Documents, Pictures, Videos, and more.
   
5. Contact technical support: If you've tried all the above steps and still encounter the "Inaccessible Boot Device" error, it's recommended to reach out to the technical support of Acer or Crucial for further assistance. They may be able to provide specific guidance or offer solutions tailored to your laptop and SSD.
   

Please note that installing an operating system on a different computer and then transferring the SSD to another computer can sometimes cause compatibility issues, as different hardware configurations may require different drivers or settings. It's generally recommended to install the operating system directly on the target computer to minimize such complications.

Best regards

Derrick Qian | Microsoft Community Support Specialist

 

SSD inaccessible boot device

I recently changed my motherboard to a MSI B250M Gaming Pro and for the first 2 days Windows 10 Pro was booting completely fine on my Samsung Evo 850 500gb SSD until last night where I kept receiving the error inaccessible boot device. I have placed a
copy of Windows onto one of my hard drives and tried to copy over the information onto my SSD (after I formatted it) but I still keep getting the inaccessible boot device error. All help is appreciated.

 

Inaccessible Boot Device after SSD Upgrade

I recently upgraded from a 240gb Samsung SSD to a 500gb SSD. The first time I started Win 10 Pro all went well. It remained that way for days until I did a restart.

When performing a restart Win 10 Pro would display the startup screen with logo and spinning "circle." After about a minute I'd get the nasty BSOD with error message "inaccessible boot device."

I use a third-party backup program and perform disc image backups daily. When I restore an image file from an earlier date and reboot, Win 10 Pro will start with no problems. However, when I reboot at some point in time, I again get the BSOD with "inaccessible
boot device"

I did a clean Win 10 install just to verify hardware compatibility, BIOS settings, etc. The Win 10 clean install booted and ran without a problem.

I have nearly 100 programs and utilities as well data files, music, photos, email, etc.. installed. Starting over would really suck. Install codes, activations, etc., would take days, if not weeks to complete.

Yes, I searched this topic and tried most of the suggested repairs. None have worked for me. There has to be a way to repair/replace boot info.

Thanks for any help you can offer!

Mark