Windows 10: Key board problem and shift problems

basically for example if i wanted to do $ i will normanlly hold shift then press 4 but now i have to hold down shift and hold down 4 then let go of shift to get $

:)

 

Both shift keys

Hello.
I have problem with Lenovo Idea Pad 100 laptop (OS: WIN10). After replacing HDD into SSD I faced a strange problem. Both Shifts of the keyboard doesn‘t work .
I have tried to:

• Check if sticky keys are off. They are off.
• Connect external keyboard via USB port. Shift keys on external keyboard works good.
• Check the keyboard on online tester which indicates pressed buttons. It can‘t indicate press of the shift
• Change several different input languages. The problem is on all of them.
• Reinstall keyboard driver
• Check if connection is OK. It is OK.
• Tried to run computer without screws (I have read in one forum that screws could touch the keyboard from the bottom and it wouldn‘t operate normal)

I believe that keyboard is not damaged because connector damage could cause just exact part of keyboard failure, while it is impossible to do physical damage for both shifts. Any solutions?

 

key board problem

Hello,

You may be experiencing this issue with your keyboard due to stuck keys. To narrow down the issue, we'd like to ask a few questions:

• To check if we're on the same page, does it paste whatever you copied/cut whenever you press the
  Shift button?
• Have you tried using a different keyboard to see if it is a hardware problem?
• Have your tried using the same keyboard on a different computer?
• Were there any changes made on your computer settings prior to this issue?

Meanwhile, you can refer to this
article which lists all possible troubleshooting steps for keyboard issues.

We look forward to your response.

 

Shift/ctrl key problem.

Hi Jovan,

The issue you're experiencing is probably due to incorrect settings. A Windows Ease of Access feature called
Filter keys is an accessibility function that tells the keyboard to ignore repeated strokes. When this function is enabled, it ignores whatever key is pressed down or repeatedly pressed. To verify this, follow the steps below:

• Open Control Panel.
• Click on Ease of Access.
• Under Ease of Access Center, click on Change how your keyboard works.
• Under Make it easier to type, click on Set up Filter keys.
• The Turn on Filter Keys should not be checked, as well as
  Turn on Filter Keys when right SHIFT is pressed for 8 seconds.

We also suggest that you play around with the features and check which one works best for you. If the issue persists, let us know.