Windows 10: NVME attached in USB, now do not boot on laptop

Hi,It happend sometimes that when i needed to clone the disk to another and so attached it as USB to another machine, when I plugged it in the original laptop or pc it gives bluescreen and do not boot. The only solution to this is format. Error code: 0xc000000eCan you give me some help? Thank you.

:)

 

USB boot for bios update

Did the first step. It already doesn't work. Note the capacities and drive letters M:/N: The HP utility is about to format my raid-1 volume containing my 2 750gb drives. It thinks it's the usb stick. I can not select any other drives in the HP utility. My 512mb usb stick is U:.

Any other suggestions?

 

Boot Surface Laptop to USB - no Volume button

Hello Jimmy,

This doesn't list the "Surface Laptop", but you might give it a try to see.

*Arrow Boot Microsoft Surface from a USB device

Otherwise, you should be able to use OPTION ONE below to boot from the USB from advanced startup.

*Arrow Boot from USB Drive on Windows 10 PC Windows 10 Installation Upgrade Tutorials

 

Booting from USB on x38 Motherboard, NOT?

Typically the USB should be listed under the hard drive boot order. Set your "Boot Device Priority" to HDD first, then set the hard drive boot order to the USB stick first.