Windows 10: My SSD hard drive with windows and write protected got corrupted, I want to format or wipe...

Hello everyone, while working on my laptop, it suddenly show a blue screen, and had to restart it, upon restarting it shows a message stating OS stopped working, insert installation media to reinstall Windows.I have tried to install windows on it, but it's showing no drive found. I have tried to even format or wipe the ssd to remove the windows and clean the disk but whenever i plugged it to any system, it freezes the system. Hence so many safe erase tools i have tried won't work, even disk management and windows explorer also freezes. But whenever I unplug the drive the system start working n

:)

 

How To Format A Write Protected Flash Memory ?

¿You already tried this one?...

Run CMD


1. diskpart
2. list disk

Then in the 3º step, put the correct number of disk in the list for the usb flash (if it's listed in disk 3, then you'll have to write select disk 3).

2. select disk #
3. clean
4. create partition primary
5. select partition 1
6. active
7. format fs=fat32
8. assign
9. exit

with that commands you will format the flash drive in fat32, if you have a large drive you can select also "format fs=ntfs" in step 7.

good luck!

 

How to gain access to write protected external hard drive

1. Check the physical switch. Some external hard drives have a physical switch that can be used to enable or disable write protection. Check the drive for a small switch that may be labeled "Write Protect" or "Lock." If the switch is in the "Write Protect" position, move it to the "Unlock" position.
   
2. Remove the write protection tab. Some external hard drives have a small tab that can be used to enable or disable write protection. This tab is usually located on the side of the drive. If there is a tab, remove it.
   
3. Format the drive. If the drive is formatted as a read-only format, you will need to format it as a writable format. To do this, connect the drive to your computer and open File Explorer. Right-click on the drive and select "Format." In the Format dialog box, select "NTFS" as the file system and click "Start."
   
4. Use a data recovery tool. If the drive is damaged or corrupted, you may need to use a data recovery tool to gain access to the data. There are many data recovery tools available, such as Recuva and Disk Drill. These tools can scan the drive for lost or deleted files and recover them.
   

If you are unable to gain access to the drive using any of these methods, you may need to contact the manufacturer of the drive for assistance.

Here are some additional tips for gaining access to a write protected external hard drive:

• Make sure that the drive is properly connected to your computer.
  
• Try connecting the drive to a different port on your computer.
  
• Try restarting your computer.
  
• Try updating the drivers for your hard drive.
  
• If you are using a USB drive, try formatting it as a FAT32 drive.
  
• If you are using a FireWire drive, try formatting it as a NTFS drive.
  

If you are still unable to gain access to the drive, you may need to contact the manufacturer of the drive for assistance.

 

How to format write protected usb pendrive?

How to format write protected usb pendrive?

tried all stesp from following list, but not sucessful.

Code: http://www.makeuseof.com/tag/how-to-fix-write-protection-errors-on-a-usb-stick/[/quote]