Windows 10: BSOD Bugcheck Error

I've been getting BSOD errors like this for a while now. It's always random and seems to happen most when my PC is left idle for a bit, but it has happened while in use a few times as well. Event viewer reads it as: The computer has rebooted from a bugcheck. The bugcheck was: 0x00000050 0xffff9a8cec84a5f0, 0x0000000000000000, 0xfffff802b81d3d0c, 0x0000000000000002. A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: da99b89a-42b0-4c93-ae1d-97a8785e8027.I've looked at co

:)

 

(BSOD) bugcheck was: 0x000000a0 INTERNAL_POWER_ERROR

Has any one got this BSOD when stress testing a overclock before? i can get the minidump if some one can read it for me i was trying for 4.5Ghz @ 1.31v and after around 20min of stressing i would get this BSOD and it would shut my system down not even sure i saw a BSOD just a shutdown?

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.